g.inp

Discussions for BiPAC 8800 series: 8800NL, 8800NLR2, 8800AXL, 8800AXLR2
Post Reply
gmorgan
Posts: 19
Joined: Sat May 17, 2014 8:19 am

g.inp

Post by gmorgan »

With g.inp being rolled out to fibre cabinets. I don't think the 8800n supports this will there be a firmware upgrade?

I say I don't think the 8800nl supports it as the question was asked in this thread viewtopic.php?f=19&t=2972 and was only answered with vectoring.

Thanks
Last edited by gmorgan on Wed Mar 04, 2015 6:04 pm, edited 1 time in total.
oldgrump
Posts: 6
Joined: Wed Oct 08, 2014 7:43 pm

Re: g.inp

Post by oldgrump »

Assuming that this actually refers to the 8800NL (?), I'm interested in the answer too. As gmorgan says, G.INP is being rolled out and I do know of one person who has had it applied to his connection. He uses the Huawei HG612 modem, and this clearly reports a lot of extra information which isn't reported on a non-G.INP connection.

So please, does (or will) the 8800NL support G.INP?
swatboy79
Posts: 110
Joined: Tue Jan 29, 2013 12:08 pm

Re: g.inp

Post by swatboy79 »

Any update on this?
swatboy79
Posts: 110
Joined: Tue Jan 29, 2013 12:08 pm

Re: g.inp

Post by swatboy79 »

the BiPAC 8300/8400 series seems (not that it seems to exist anyway, other than on the billion.com site) to support the following:

- ITU-T G.998.4 (G.inp)
- ITU-T G.993.5 (G.vector)

and 30a profile, how come the 8800 seems stunted?

http://www.billion.com/product/vdsl.html
Chrysalis
Posts: 10
Joined: Mon Apr 01, 2013 3:37 pm

Re: g.inp

Post by Chrysalis »

come on billion, we need a response regarding vectoring and g.inp, both not present in firmware and spec pages.

Do I stop reccomending your products?
billion_fan
Posts: 5374
Joined: Tue Jul 19, 2011 4:30 pm

Re: g.inp

Post by billion_fan »

Chrysalis wrote:come on billion, we need a response regarding vectoring and g.inp, both not present in firmware and spec pages.

Do I stop reccomending your products?
We are checking with our engineers regarding g.inp support, our 8800NL already supports vectoring
gmorgan
Posts: 19
Joined: Sat May 17, 2014 8:19 am

Re: g.inp

Post by gmorgan »

Awesome please keep us updated. :)
simon194
Posts: 49
Joined: Tue May 08, 2012 2:04 pm

Re: g.inp

Post by simon194 »

swatboy79 wrote: and 30a profile, how come the 8800 seems stunted?

http://www.billion.com/product/vdsl.html
Profile 30a isn't going to be used in the UK so it not necessary to support it.
swatboy79
Posts: 110
Joined: Tue Jan 29, 2013 12:08 pm

Re: g.inp

Post by swatboy79 »

No it won't since G.Fast is the future copper bodge.

However G.inp is the last outstanding feature. Would be nice it officitally stated it has G.vector on the website.
Lannie
Posts: 6
Joined: Thu Feb 26, 2015 8:41 am

Re: g.inp

Post by Lannie »

Any update on this?
Post Reply