Obtain WAN Stats in Bridge Mode

[slostuk]

I have configured my 8900ax-2400 in bridge, however I would like to be able to login into to obtain line and WAN stats, is there a way that I can do this.
I have tried configuring my Netgaer WIFI 6 router on the 192.168.1.x subnet, and configuring DHCP to hand out address from 192.168.1.100 to 192.168.1.199 (just like the billion, I have disabled DHCP on the billion also, however the Netgear router will not allow me as this is same subnet as the WAN.

[billion_fan]

I have configured my 8900ax-2400 in bridge, however I would like to be able to login into to obtain line and WAN stats, is there a way that I can do this.
I have tried configuring my Netgaer WIFI 6 router on the 192.168.1.x subnet, and configuring DHCP to hand out address from 192.168.1.100 to 192.168.1.199 (just like the billion, I have disabled DHCP on the billion also, however the Netgear router will not allow me as this is same subnet as the WAN.

How I normally advise people using bridging mode, is you will need to connect a PC directly to the Billion, with a static IP (as the DHCP sever is off) within the same range, then access it on its IP address

eg Billion - 192.168.1.254
Direct connection to the Billion - 192.168.1.200, subnet 255.255.255.0

[slostuk]

I got it sorted, however it turns out that the WiFi performance of the new router is not that great.