billion_fan wrote:2bagstew wrote:Hi,
Will this method work on other providers such as talktalk, Plusnet etc.
Thanks
Talktalk home fibre users, Virgin Fibre users
1. Reset the router to factory default settings
2. Click on 'Configuration >> WAN >> WAN service'
3. Remove the 'pppoa0' interface which is used for ADSL
4. Click on the 'Add' button
5. Change the 'WAN' port to 'Ethernet'
6. Change the 'Type' to 'IP over Ethernet'
7. Click on 'Next'
8. Under 'Available Routed WAN Interfaces' you will see your new 'ipoe' connection, select it and click on the arrow pointing left (so this 'ipoe' connection should now be listed under 'Selected Default Gateway Interfaces'
9. Then click on 'Next' and that should be it.
PlusNet , BT, talktalk business users Fibre connections
1. Reset the router to factory default settings
2. Click on 'Configuration >> WAN >> WAN service'
3. Remove the 'pppoa0' interface which is used for ADSL
4. Click on the 'Add' button
5. Change the 'WAN' port to 'Ethernet'
6. Change the 'Type' to PPPOE
7. Enter your username and password in sections provided
8. Click on 'Next'
9. Under 'Available Routed WAN Interfaces' you will see your new 'PPPOE' connection, select it and click on the arrow pointing left (so this 'PPPOE' connection should now be listed under 'Selected Default Gateway Interfaces'
10. Then click on 'Next' and that should be it.