Billion UK Forum

Arkoth wrote:still no news ?

Still no news, once I get a reply I will post it

Arkoth wrote:still no news ?

Try the attached firmware, I would advise to restart with factory default settings, as there have been lots of changes within the firmware.

This firmware should resolve SNMP crash issue

Worked for me, snap back up and running well. Thanks Billion!

I flash the modem with this new firmware 2.32d.dr3 (factory settings):
I see a new DSL PHY and Driver Version: A2pD039f.d24m
adsl ok.

log & snmp is ok for the moment (snmpb & cacti tested).
I tell you in one week if it's ok (without crash).

same Wireless Driver Version in this firmware: 6.30.102.7.cpe4.12L08.4
so I disable wireless as it randomly crash the router too.

there have been lots of changes within the firmware.

Can we have the details/changelog ?

Arkoth wrote:I flash the modem with this new firmware 2.32d.dr3 (factory settings):
I see a new DSL PHY and Driver Version: A2pD039f.d24m
adsl ok.

log & snmp is ok for the moment (snmpb & cacti tested).
I tell you in one week if it's ok (without crash).

same Wireless Driver Version in this firmware: 6.30.102.7.cpe4.12L08.4
so I disable wireless as it randomly crash the router too.

there have been lots of changes within the firmware.

Can we have the details/changelog ?

I don't have the release notes for the firmware, as this is a beta firmware with the SNMP fix, (already confirmed fixed and working with another customer)

[OT] ETEC7800DXL_2.32d.dr3.afw cured a big DHCP configuration problem I was having (thanks) but does not generate any Security Logs.

I have Configure Log set to Enable, Notice, Notice, Local. Changing settings doesn't make it better.

There is a problem with the SNMP service common to multiple current Billion routers, I have had this problem with a 8800AXL, as a work around try using SNMPv1 rather than SNMPv2 if possible. Mine has been working fine for about a week since changing to V1

m-a-r-k wrote:[OT] ETEC7800DXL_2.32d.dr3.afw cured a big DHCP configuration problem I was having (thanks) but does not generate any Security Logs.

I have Configure Log set to Enable, Notice, Notice, Local. Changing settings doesn't make it better.

Changing the log levels is for 'System Log' not the security log

One week later: it's OK ! it still works with this firmware !

On the modem 7800DXL:



On cacti, the graph (last week):
- Attenuation
- Speed
- SNR
- traffic


I don't know why it stop working the 2015/04/25 at 07:00 and re-work at 07:30 without doing anything...


I'm very happy, thank you for this firmware ! it is stable for me

Arkoth wrote:One week later: it's OK ! it still works with this firmware !

On the modem 7800DXL:



On cacti, the graph (last week):
- Attenuation
- Speed
- SNR
- traffic


I don't know why it stop working the 2015/04/25 at 07:00 and re-work at 07:30 without doing anything...


I'm very happy, thank you for this firmware ! it is stable for me

Thanks for the update Arkoth