Page 4 of 4

Re: 8800AXL R2 BT TV setup

Posted: Wed Sep 19, 2018 1:46 pm
by billion_fan
Grimers wrote: Wed Sep 19, 2018 1:34 pm2.52.d10.
I just restored the config file on my 8800AXL R2 and every was fine.

I built the config off 2.52.d10, did you extract the '8800AXL BT VDSL IPTV port 1 config.conf' from the zip file?? then use the extracted file to update your device

Re: 8800AXL R2 BT TV setup

Posted: Wed Sep 19, 2018 3:39 pm
by Grimers
Yes, how strange...

Re: 8800AXL R2 BT TV setup

Posted: Wed Sep 19, 2018 4:34 pm
by billion_fan
Grimers wrote: Wed Sep 19, 2018 3:39 pm Yes, how strange...
What error do you get when you try and upload the config file??

I assume you are using the 'Configuration >> System >> Backup / Update' section

Re: 8800AXL R2 BT TV setup

Posted: Wed Sep 19, 2018 4:46 pm
by Grimers
I don't get an error, it just uploads it, and the internet (not DSL) light goes out, and then nothing else happens.

Yes, that's correct.

Re: 8800AXL R2 BT TV setup

Posted: Wed Sep 19, 2018 4:51 pm
by billion_fan
Grimers wrote: Wed Sep 19, 2018 4:46 pm I don't get an error, it just uploads it, and the internet (not DSL) light goes out, and then nothing else happens.

Yes, that's correct.
That's strange you should normally get the percentage bar page showing the status of the upload (around 40% in the device should reboot with the power light flashing)

Can you try with different web browser, maybe in the next couple of days, as you don't want DLM taking action

Re: 8800AXL R2 BT TV setup

Posted: Wed Sep 19, 2018 6:17 pm
by Grimers
Yeah, I got that page but no power light flashing. Yes, I'll try that soon. Thanks for your help.

Re: 8800AXL R2 BT TV setup

Posted: Thu Sep 20, 2018 9:08 am
by Grimers
Well, whatever I did yesterday seems to have fixed the issue, hopefully not temporarily! :D