Page 1 of 1
7800N 1.06e and one-to-one NAT
Posted: Thu Nov 03, 2011 4:20 pm
by geordish
Hi,
One-to-one NAT was working perfectly with 1.06d. I upgraded to 1.06e yesterday, and now no longer works.
I have tried removing, and re-adding the config, but no luck. Has anyone else got this working under this firmware version?
Regards,
Dave
Re: 7800N 1.06e and one-to-one NAT
Posted: Thu Nov 03, 2011 4:24 pm
by billion_fan
Did you reset back to factory default settings after the firmware upgrade?
When you mention you removed the config and re-adding the config, was this from a backup config file?
Have you tried re-entering all the details from scratch manually?
Re: 7800N 1.06e and one-to-one NAT
Posted: Thu Nov 03, 2011 4:25 pm
by geordish
I've not tried factory resetting it. I removed the one-to-one NAT settings, completely, and then re-added them.
I will try a factory reset when I get home from work.
Re: 7800N 1.06e and one-to-one NAT
Posted: Thu Nov 03, 2011 4:28 pm
by billion_fan
Please try a factory reset and manually reconfigure the device.
If you still have issues, please let me know, I will test the function here on 1.06e if needed.
Re: 7800N 1.06e and one-to-one NAT
Posted: Sat Nov 05, 2011 9:52 am
by geordish
I've tried a factory reset to no avail.
In addition to the one-to-one NAT problems, I've noticed the DHCP server seems a bit flakey, and the router only obtains sync speeds of 1/2 what it could before the upgrade.
Can I downgrade back to 1.06d? I can't find the firmware on the website anywhere.
Re: 7800N 1.06e and one-to-one NAT
Posted: Mon Nov 07, 2011 9:47 am
by billion_fan
Yes you can downgrade the firmware.
Attached is firmware 1.06d.
Re: 7800N 1.06e and one-to-one NAT
Posted: Tue Nov 08, 2011 10:26 am
by billion_fan
Hi geordish
I have just tested the one to one NAT on the firmware 1.06e, and it works.
Please see the attached screen shot.