unblockus settings - no idea where to put them
Posted: Tue Aug 13, 2013 10:51 pm
Hi there,
I've just bought the 7800n and it's working fine. However, I'm using unblockus to watch netflix on my PS3 which is having issues. The issues are down to the way that sony / netflix have changed how they connect.
I've got some advice from unblockus now, but I have no idea how to implement either of the options - can someone help where in the settings I should be doing this - and if you could advise which is the easiest option for this particular router.
Many thanks.
Method One - Application Blocking
Make sure you have our 2 main DNSs setup in your router. They are; 208.122.23.23 & 208.122.23.22. If you have a 3rd space for DNS entry then enter 184.106.242.193.
Go to “Access Restrictions” or something along the lines of application blocking. The idea is to block the DNS protocol on a specific MAC address. You will need to create a new policy here.
Set the policy name to something like blockdns.
Enter the MAC address of your PS3.
Block DNS on port 53 on both UDP and TCP.
Save settings.
Follow the PS3 instructions below.
Method Two - Static Routing
Here we will be adjusting the routing table on the router/modem.
Make sure our DNS is setup in your router
Go to advanced routing or find where you can setup a static route.
Create a new route called dns1.
Destination IP: 8.8.8.8
Subnet Mask: 255.255.255.255 or 255.255.255.252
Gateway: Any valid local IP other than the router itself.
Interface: LAN & Wireless
Save & Continue
Repeat steps 3 to 7 for the IPs of 208.67.222.222 and 209.244.0.3.
Follow the PS3 instructions below.
I've just bought the 7800n and it's working fine. However, I'm using unblockus to watch netflix on my PS3 which is having issues. The issues are down to the way that sony / netflix have changed how they connect.
I've got some advice from unblockus now, but I have no idea how to implement either of the options - can someone help where in the settings I should be doing this - and if you could advise which is the easiest option for this particular router.
Many thanks.
Method One - Application Blocking
Make sure you have our 2 main DNSs setup in your router. They are; 208.122.23.23 & 208.122.23.22. If you have a 3rd space for DNS entry then enter 184.106.242.193.
Go to “Access Restrictions” or something along the lines of application blocking. The idea is to block the DNS protocol on a specific MAC address. You will need to create a new policy here.
Set the policy name to something like blockdns.
Enter the MAC address of your PS3.
Block DNS on port 53 on both UDP and TCP.
Save settings.
Follow the PS3 instructions below.
Method Two - Static Routing
Here we will be adjusting the routing table on the router/modem.
Make sure our DNS is setup in your router
Go to advanced routing or find where you can setup a static route.
Create a new route called dns1.
Destination IP: 8.8.8.8
Subnet Mask: 255.255.255.255 or 255.255.255.252
Gateway: Any valid local IP other than the router itself.
Interface: LAN & Wireless
Save & Continue
Repeat steps 3 to 7 for the IPs of 208.67.222.222 and 209.244.0.3.
Follow the PS3 instructions below.