Page 1 of 1
* SOLVED * Cannot Amend Virtual Server End Port
Posted: Mon Feb 24, 2014 11:26 am
by irv075
I am trying to port forward to an internal web server. The external port should be 8090 and the internal port is 80.
I can change the external start and end ports to 8090, but it will only allow me to modify the internal start port because the box for end port is greyed out. Anyone got any ideas how to amend this?
Re: Cannot Amend Virtual Server End Port
Posted: Thu Feb 27, 2014 9:45 am
by billion_fan
irv075 wrote:I am trying to port forward to an internal web server. The external port should be 8090 and the internal port is 80.
I can change the external start and end ports to 8090, but it will only allow me to modify the internal start port because the box for end port is greyed out. Anyone got any ideas how to amend this?
Try firmware 2.32d, attached is my rule seems to work fine
Re: Cannot Amend Virtual Server End Port
Posted: Thu Feb 27, 2014 11:11 am
by irv075
I'm already on 2.32d, but have had this issue for a couple of firmwares now. However, your screenshot gave me a hint on the solution and I've got it working:
You have to make sure that you are using "Custom Service" first. If you try and select Web Server (HTTP) then change the ports it does not work
