Page 1 of 1
How to routing some LAN ip address to one PC with VPN server
Posted: Mon Jun 16, 2014 11:44 am
by dafebe
Hi everybody,
I'm want to do this: routing some LAN ip address (192.168.0.40 to 192.168.0.50) to one PC (192.168.0.51) with VPN server/client.
This VPN Client is going to connect VPN tunnel encrypts my connection to internet for these pc ip 192.168.0.40 to 192.168.0.50 .
How I can do this?
Thank for your help
Best Regards
dafebe
Re: How to routing some LAN ip address to one PC with VPN se
Posted: Mon Jun 16, 2014 11:58 am
by billion_fan
dafebe wrote:Hi everybody,
I'm want to do this: routing some LAN ip address (192.168.0.40 to 192.168.0.50) to one PC (192.168.0.51) with VPN server/client.
This VPN Client is going to connect VPN tunnel encrypts my connection to internet for these pc ip 192.168.0.40 to 192.168.0.50 .
How I can do this?
Thank for your help
Best Regards
dafebe
Can you explain more on what you trying to achieve??
So you want IP address 192.168.0.40 ~ 192.168.0.50 to be routed through a VPN tunnel, so when a device using 192.168.0.40 goes to whatsmyip.com the IP address will show the VPN servers WAN IP address, meaning all traffic is routed through the VPN tunnel
Re: How to routing some LAN ip address to one PC with VPN se
Posted: Mon Jun 16, 2014 10:03 pm
by dafebe
you get me perfectly.
Yes this it is.
How can I do this?
Re: How to routing some LAN ip address to one PC with VPN se
Posted: Tue Jun 17, 2014 9:30 am
by billion_fan
dafebe wrote:you get me perfectly.
Yes this it is.
How can I do this?
With a Billion 7800DX this is possible, setup a PPTP client connection on the 7800DX to dial out to your PPTP VPN provider.
Once the info is added (VPN server IP address, username, password and Auth. Type) then tick 'Enable' and use 'Default Gateway'
Please note, that all traffic will be routed through the VPN connection once this PPTP client is setup, so any device connected to the router (wired/wireless) will also be routed through the VPN server. So it will not be only the IP address range 192.168.0.40 to 192.168.0.50 it will be any IP/device that connects to the router)
Re: How to routing some LAN ip address to one PC with VPN se
Posted: Tue Jun 17, 2014 10:06 pm
by dafebe
I think that I explained bad sorry.
delete the question about vpn
I try to remake the question.
I want whit rounting service on rounter redirect this IP address 192.168.0.40 ~ 192.168.0.50 to 192.168.0.5.
How I can do this?
I think it is possible through the advances setup - routing - static route.
Is it correct?
But How do I set up it if I want include this range of ip 192.168.0.40 ~ 192.168.0.50?
Best regards
dafebe
Re: How to routing some LAN ip address to one PC with VPN se
Posted: Fri Jun 20, 2014 11:18 am
by billion_fan
dafebe wrote:I think that I explained bad sorry.
delete the question about vpn
I try to remake the question.
I want whit rounting service on rounter redirect this IP address 192.168.0.40 ~ 192.168.0.50 to 192.168.0.5.
How I can do this?
I think it is possible through the advances setup - routing - static route.
Is it correct?
But How do I set up it if I want include this range of ip 192.168.0.40 ~ 192.168.0.50?
Best regards
dafebe
Our engineers have stated try following the attached rule on our new 7800 series