Page 1 of 1
Talk Talk
Posted: Thu Nov 13, 2014 10:40 pm
by dabaa12
I wondered if anyone could help with the settings.
I have talk talk fibre. I can access the tv channels fine except for the add on sky sports etc. does anyone know how to adust the router so that I can access these channels?
thanks
Re: Talk Talk
Posted: Tue Nov 18, 2014 10:34 am
by billion_fan
dabaa12 wrote:I wondered if anyone could help with the settings.
I have talk talk fibre. I can access the tv channels fine except for the add on sky sports etc. does anyone know how to adust the router so that I can access these channels?
thanks
Follow the steps below
1. Login to the router
2. Click on 'Configuration >> WAN >> Add'
3. Change the 'Layer2 Interface' to 'PTM
4. Change the 'Type' to 'Bridging'
5. Chnage the '802.1P Priority' to '0'
6. Change the ' 802.1Q VLAN ID ' to '101'
7. Click on 'Next'
8. Click on 'Configuration >> LAN'
7. Change 'IGMP Snooping Mode' to 'Standard Mode'
8. Click on 'Apply'
9. Click on 'Advanced Setup >> Multicast'
10. Tick the 'Membership Join Immediate (IPTV)' box
11. Click on 'Apply'
12. Restart your youview box
If your youview box is using a wireless connetion follow the steps below
1. Configuration >> Wireless
2. Tick the 'Enable' box for Wireless 'Multicast Forwarding (WMF)'
3. Click on 'Apply'
I hope this helps

Re: Talk Talk
Posted: Sat Feb 27, 2016 1:05 pm
by wydmex
Hi billion_fan
Can you perhaps explain please what actually happens when one adds the bridging interface? What is one bridging with exactly? In particular if they already have IGMP Multicast enabled on the IPoE interface they created, and IGMP Snooping enabled on the LAN interface, and their Multicast configuration set appropriately.
FYI: I am also with TalkTalk for fibre, have a Billion 8800AXL (no Openreach modem) but use Sky and their on demand services. No real issues with On Demand content, but just wondering if there are any improvements to be had. Thanks!
Re: Talk Talk
Posted: Mon Feb 29, 2016 9:46 am
by billion_fan
wydmex wrote:Hi billion_fan
Can you perhaps explain please what actually happens when one adds the bridging interface? What is one bridging with exactly? In particular if they already have IGMP Multicast enabled on the IPoE interface they created, and IGMP Snooping enabled on the LAN interface, and their Multicast configuration set appropriately.
FYI: I am also with TalkTalk for fibre, have a Billion 8800AXL (no Openreach modem) but use Sky and their on demand services. No real issues with On Demand content, but just wondering if there are any improvements to be had. Thanks!
The Bridge wan is for the IPTV, this is the WAN connection used for streaming, (from what we found out on the 7800N for BT sports etc)
Re: Talk Talk
Posted: Sat Mar 05, 2016 1:24 pm
by wydmex
Appreciate that, but was really after the technical details and background if you have it. Thanks!
Re: Talk Talk
Posted: Mon Mar 07, 2016 10:48 am
by billion_fan
wydmex wrote:Appreciate that, but was really after the technical details and background if you have it. Thanks!
That's all the info I have
