Billion UK Forum

Dear billion fan,
shall we upgrade with the new firmware from the Au Billion site or wait for the Uk Billion site 2.32e firmware?
When are you going to publish the new version for european customers?
Best Regards
Antonio

I read the release notes. Lots of fixes but no mention to statistics which have always been bugged. Lost hope.

Antonio wrote:Dear billion fan,
shall we upgrade with the new firmware from the Au Billion site or wait for the Uk Billion site 2.32e firmware?
When are you going to publish the new version for european customers?
Best Regards
Antonio

Wait, as I should receive news about the UK version

Dear billion_fan,
dealing with the 2.32e release notes there should be a mistake in the following:
... 5. Update ADSL PHY code to A2pD038f...
Instead there should be written:
...5. Update ADSL PHY code to A2pD039f...
In 2.32d.dr3 the A2pD039f driver is finally able to extimate the real Attainable Rate.
Or are you reverting to the old A2pD038f phy code?
Best regards
Antonio

Error on the 2.32e release note regarding the PHY code for 8800NL has been amended.

I like the idea expressed on page 4 that visitors have to take a test before being allowed a connection.

Does item 42 relate to the frozen DHCP lease issue?

Antonio wrote:Dear billion_fan,
dealing with the 2.32e release notes there should be a mistake in the following:
... 5. Update ADSL PHY code to A2pD038f...
Instead there should be written:
...5. Update ADSL PHY code to A2pD039f...
In 2.32d.dr3 the A2pD039f driver is finally able to extimate the real Attainable Rate.
Or are you reverting to the old A2pD038f phy code?
Best regards
Antonio

With 2.32e my attainable rate is showing a smaller number than my actual rate....

I've been getting that recently after setting my SNR to 5 and then 4.

m-a-r-k wrote:I've been getting that recently after setting my SNR to 5 and then 4.

Everything seems fine on the 7800 series running on ADSL2+ (two screen shots attached from our 2 test lines Enta and Zen)

The 8800 series seems to show a lower Attainable Rate then the actual sync rate.

Issue has been reported to our engineers

billion_fan wrote: Everything seems fine on the 7800 series running on ADSL2+ (two screen shots attached from our 2 test lines Enta and Zen)

Not here.... (7800DXL)

Worked fine before.