Help, lowering SNR leads to no increase in download speed
Posted: Sat Jun 09, 2012 11:44 am
Hello, I am a new member who just purchased Billion 7800N with the hope of gaining a respectable download speed.
My initial stats yesterday before installing the Billion were:
ADSL
ADSL Firmware Version: FwVer:3.11.2.175_TC3086 HwVer:T14.F7_6.0
Line State: Showtime
Modulation :ADSL2 PLUS
Annex Mode : ANNEX_A
Downstream Upstream
SNR Margin : 9.0. 15.8db
Line Attenuation: 58.5. 36.6db
Data Rate: 1536. 605kbps
Max Rate: 3732. 945 kbps
POWER: 14.7. 6.3dbm
CRC: 0 0
During this time, I have carried out the master phone socket test without any difference, nevertheless, I moved my ADSl line to the master phone socket, installed an interstitial plate into the socket and use two microfilter in a 'daisy chain' to separate the phone and modem connection to no avail, I even tried TP link modem and wireless routers (8040T and WR1080ND). All this to no avail. From the above stats and my broaband speed test website I should be able to get to a maximum of 4MBps download speed but I have never got up to 1.6Mbps.
My initial stats yesterday before installing the Billion were:
ADSL
ADSL Firmware Version: FwVer:3.11.2.175_TC3086 HwVer:T14.F7_6.0
Line State: Showtime
Modulation :ADSL2 PLUS
Annex Mode : ANNEX_A
Downstream Upstream
SNR Margin : 9.0. 15.8db
Line Attenuation: 58.5. 36.6db
Data Rate: 1536. 605kbps
Max Rate: 3732. 945 kbps
POWER: 14.7. 6.3dbm
CRC: 0 0
During this time, I have carried out the master phone socket test without any difference, nevertheless, I moved my ADSl line to the master phone socket, installed an interstitial plate into the socket and use two microfilter in a 'daisy chain' to separate the phone and modem connection to no avail, I even tried TP link modem and wireless routers (8040T and WR1080ND). All this to no avail. From the above stats and my broaband speed test website I should be able to get to a maximum of 4MBps download speed but I have never got up to 1.6Mbps.