Page 1 of 1
BiPAC 7800N IPv6
Posted: Mon Jul 30, 2012 10:05 am
by lokototo
Hello,
I have upgraded today my 7800N Annex A from 1.06e to 1.06g
now I can't find option for IPv6. where is it please?
thanks
Re: BiPAC 7800N IPv6
Posted: Mon Jul 30, 2012 10:36 am
by billion_fan
Hi lokototo
Normally found on the WAN Profile page (Advanced Menu) or under the WAN on the left hand side (Basic Menu).
Re: BiPAC 7800N IPv6
Posted: Mon Jul 30, 2012 11:53 am
by lokototo
Re: BiPAC 7800N IPv6
Posted: Mon Jul 30, 2012 5:05 pm
by billion_fan
After you upgraded to firmware 1.06g did you reset back to factory default settings, and also make sure you DO NOT restore settings from previous firmware builds.
Re: BiPAC 7800N IPv6
Posted: Mon Jul 30, 2012 6:24 pm
by lokototo
reset & no backup used
Re: BiPAC 7800N IPv6
Posted: Tue Jul 31, 2012 10:23 am
by billion_fan
I see your VPI and VCI are not the UK standard, are you in another country?
Did you get the firmware from our UK website or did you grab the firmware from another site?, try downloading the firmware from the link below and reflashing the firmware.
http://www.billion.uk.com/esupport/inde ... mware-106g
No other users on this forum have had issues with IPv6 once flashed to firmware 1.06g.
Also try using a different web browser.
Re: BiPAC 7800N IPv6
Posted: Tue Jul 31, 2012 10:53 am
by lokototo
I have grab the firmware from billion.com (general/default website)
I'm in Europe/France.
I use firmware for Annex A
I have test with FireFox, IE, Chrome, IPv6 is missing.
I have contact Billion.com but no response. No support from Billion?
No general forum?
thanks
Re: BiPAC 7800N IPv6
Posted: Tue Jul 31, 2012 12:04 pm
by billion_fan
Try using the link I provided (below), for UK firmware, this UK firmware has IPv6 on it, tested and verified.
http://www.billion.uk.com/esupport/inde ... mware-106g
