ADSL Disconnecting when using phone
Posted: Mon Nov 12, 2012 2:45 pm
Dear Billionaires,
I have a 7800N that keeps dropping my ADSL connection when I use my home phone. I'm running 1.06g firmware. The connection appears stable when the phone is ringing, it only disconnects when answering calls.
I get this status:
ADSL PPPoA 0/38 Link Down
Then:
ADSL PPPoA 0/38 Connecting
The connection is established until the phone is used again.
I have tried an old Netgear router that does not have this problem. I've also tried different filters also which do not make a difference. This is very frustrating and the fault stays with the 7800N.
Could you give me some pointers?
I get this in the logs of the router, am happy to send any further info.
I have a 7800N that keeps dropping my ADSL connection when I use my home phone. I'm running 1.06g firmware. The connection appears stable when the phone is ringing, it only disconnects when answering calls.
I get this status:
ADSL PPPoA 0/38 Link Down
Then:
ADSL PPPoA 0/38 Connecting
The connection is established until the phone is used again.
I have tried an old Netgear router that does not have this problem. I've also tried different filters also which do not make a difference. This is very frustrating and the fault stays with the 7800N.
Could you give me some pointers?
I get this in the logs of the router, am happy to send any further info.
Code: Select all
Nov 12 14:39:24 user kernel: Line 0: ADSL link down
Nov 12 14:39:25 user syslog: tc qdisc del dev ppp_0_0_38_1 root 2>/dev/null
Nov 12 14:39:25 daemon pppd[1294]: Terminating connection due to link down.
Nov 12 14:39:32 user kernel: Line 0: xDSL G.994 training
Nov 12 14:39:41 user kernel: Line 0: ADSL G.992 started
Nov 12 14:39:45 user kernel: Line 0: ADSL G.992 channel analysis
Nov 12 14:39:51 user kernel: Line 0: ADSL G.992 message exchange
Nov 12 14:39:52 user kernel: Line 0: ADSL link up, Path 0, us=606, ds=5022
Nov 12 14:39:53 daemon pppd[1294]: PPPoE: Terminating on signal 15.
Nov 12 14:39:53 daemon pppd[1294]: Clear IP addresses. Connection DOWN.
Nov 12 14:39:53 daemon pppd[1294]: Clear IP addresses.
Nov 12 14:39:53 daemon pppd[1294]: Couldn't increase MTU to 1500.
Nov 12 14:39:59 daemon pppd[1294]: Connection terminated.
Nov 12 14:39:59 daemon pppd[1294]: Connect time 9.4 minutes.
Nov 12 14:39:59 daemon pppd[1294]: Sent 199880 bytes, received 970072 bytes.
Nov 12 14:39:59 user kernel: dev_shutdown, dec ppp device refcnt, dev->refcnt=3
Nov 12 14:40:00 user kernel: unregister_netdevice: waiting for ppp_0_0_38_1 to become free. Usage count = -1
Nov 12 14:40:00 user kernel: dev->name = ppp_0_0_38_1, dev->refcnt=-1
Nov 12 14:40:00 user kernel: after reset to 0, dev->refcnt=0
Nov 12 14:40:00 daemon pppd[1294]: Exit.
Nov 12 14:40:00 daemon pppd[1955]: PPPoATM setdevname_pppoatm
Nov 12 14:40:00 daemon pppd[1955]: PPPoATM setdevname_pppoatm - SUCCESS
Nov 12 14:40:00 daemon pppd[1955]: pppd 2.4.1 started by admin, uid 0
Nov 12 14:40:00 daemon pppd[1955]: PPP: Start to connect ...
Nov 12 14:40:00 daemon pppd[1955]: Using interface ppp0_0_38_1
Nov 12 14:40:00 daemon pppd[1955]: Connect: ppp_0_0_38_1 <-->
Nov 12 14:40:00 daemon pppd[1955]: Couldn't increase MTU to 1500.
Nov 12 14:40:09 daemon pppd[1955]: LCP: timeout sending Config-Requests
Nov 12 14:40:09 daemon pppd[1955]: Connection terminated.
Nov 12 14:40:12 daemon pppd[1955]: PPP: Start to connect ...
Nov 12 14:40:12 daemon pppd[1955]: Using interface ppp0_0_38_1
Nov 12 14:40:12 daemon pppd[1955]: Connect: ppp_0_0_38_1 <-->
Nov 12 14:40:12 daemon pppd[1955]: Couldn't increase MTU to 1500.
Nov 12 14:40:18 daemon pppd[1955]: PPP LCP UP.