Billion UK Forum

Posted: **Fri Dec 07, 2012 6:50 pm**

Hi there,

7800N and two 2073N home plugs in the home now and need to keep some decent channel separation for my common SSID. Problem is no matter what I do in the config page the channel does not save to the one selected. Similarly for the 2073N , it reverts to Automatic. So I now have the 2073N and 7800N on channel 8+9 (Vistimbler scan) while the settings are configured for 11 and 1...?

Any ideas?

Posted: **Fri Dec 07, 2012 8:47 pm**

So One 2073 has channel set to 1, although it broadcasts on 3... the other is set to 6 and it broadcasts on 8. The 7800N is set to 13 and it broadcasts on 11...

The latest addition 2073 has very poor performance ... upload is only 1mb/s while other 2 are well higher at 15mb+ over wifi

This is all on sky fibre pro. Ethernet performance is 75/16 pretty consistently.

What gives?

Billion UK Forum

7800N Wireless channel settings wont save.

7800N Wireless channel settings wont save.

Re: 7800N Wireless channel settings wont save.