ADSL
Compliance
• Compliant with ADSL
Standard
- Full-rate ANSI T1.413 Issue 2
-
G.dmt (ITU G.992.1)
- G.lite (ITU
G.992.2)
- G.hs (ITU G.994.1)
- ADSL over
ISDN/U-R2
• Compliant with ADSL2
Standard
- G.dmt.bis (ITU G.992.3)
- ADSL2
Annex M (ITU G.992.3 Annex M)
(Available for
BiPAC 5200(S)A model only)
• Compliant with
ADSL2+ Standard
- G.dmt.bisplus (ITU
G.992.5)
- ADSL2+ Annex M (ITU G.992.5 Annex
M)
(Available for BiPAC 7300(G)A model
only)
Network Protocols and
Features
• NAT, static routing and
RIP-1/2
• Universal Plug and Play (UPnP)
Compliant
• Dynamic Domain Name System
(DDNS)
• Virtual Server and DMZ
• SNTP,
DNS relay and IGMP proxy
Firewall & Virtual
Private Network (VPN)
• Built-in NAT
Firewall
• Stateful Packet Inspection
(SPI)
• Prevent DoS attacks including IP
Spoofing, Land Attack, Smurf Attack, Ping of
Death, TCP SYN Flooding, etc
• Packet
Filtering - port, source IP address, destination
IP address, MAC address
• URL Content
Filtering - string or domain name
• Password
protection for system management
• VPN
pass-through
Quality of Service
Control
• Supports the DiffServ
approach
• Traffic prioritization and
bandwidth management based-on IP protocol, port
number and address
IPTV
Application*
• IGMP
Snooping
• Virtual LAN (VLAN)
• Quality of
Service (QoS)
ATM and PPP
Protocols
• ATM Adaptation Layer
Type 5 (AAL5)
• Multiple Protocol over AAL5
(RFC 2684, formerly RFC 1483)
• Bridged or
routed Ethernet encapsulation
• VC and LLC
based multiplexing
• PPP over Ethernet
(PPPoE)
• PPP over ATM (RFC 2364)
• OAM
F4/F5
Management
•
Quick Installation Wizard and Auto-scan ADSL
settings
• Web-based GUI for remote and local
management
• Firmware upgrade an
Web-based
GUI
• Embedded Telnet server for
remote and local management
• Available
Syslog monitoring
• Supports DHCP
server/client/relay
• SNMP v3, MIB-I and
MIB-II support
Operating
Environment
• Operating temperature:
0 ~ 40ºC
• Storage temperature: -20 ~
70ºC
• Humidity: 20 ~ 95% non-condensing
Models & Standards
Support
• BiPAC 7300: Annex A
& Annex M
• Annex A and Annex M:
ADSL over POTS
• Annex B and Annex U-R2: ADSL
over ISDN
Hardware
Specification
Physical
Interface
• Power
jack
• Factory default reset button
• LAN:
4-port 10/100M auto-crossover (MDI/MDI-X)
switch
• LINE: ADSL
port
Physical
Specification
• (BiPAC 7300)
Dimensions: 5.20" x 3.70" x 1.38”(132mm x 94mm x
35mm)
Power Requirement
•
Input: 12V DC, 1A |