Using existing wiring to create in-home network
The BiPAC 2075 transmits bandwidth intensive data easily and securely over the existing electrical wiring – without installation effort. It is also ideal for homes or small offices where concrete walls, successive floors in multi-storied buildings could inhibit a wireless signal. Just one touch of the “Sync” button to install the bridge utility and your high-speed network is ready. It’s as easy as simply plugging in your networking devices and using the electrical wiring in your home.

Smooth HD streaming and prioritization
With increased speeds of up to 500Mbps and utilizing QoS technology, BiPAC 2075 is ideal for streaming HD video, intense online gaming, and VoIP calling. Quality of Service (QoS) control guarantees the transmission quality by automatically prioritizing data. The BiPAC 2075 automatically recognizes the bandwidth needs of voice and video applications. QoS prioritizes the data to guarantee optimal transmission quality. TV and video images are received and displayed with absolute smoothness. QoS also guarantees the clear, instant reproduction of voice data, even when other applications are running on the network at the same time.

Reduce energy consumption
With the Smart Power Saving feature, the BiPAC 2075 can automatically detect its Ethernet connection. When the Ethernet-based device is powered down or disconnected, the BiPAC 2075 adapter will automatically fall into sleep mode, which reduces power consumption significantly. In full operation mode, the adapter can reduce its power consumption and save money on your electricity bill. Create a “Green” home and enjoy energy efficiency!

      

The connected home using the BiPAC 2075

Connecting the BiPAC 2075

	Step 1. Connect a network cable to the adapter and then plug the BiPAC 2075 into a power socket.
	Step 2. Then connect the BiPAC 2075 to a laptop, modem, router or a set-top-box.
	Step 3. Create a secure network by a simply push off the “Sync” button.

Note: Plug/socket, power cable and input voltage/frequency may vary from country to country.

Protocols
• TDMA, CSMA/CA

Standards
• Ethernet specifications: IEEE 802.3, IEEE 802.3x, IEEE 802.3u, IEEE 802.3ab Auto MDI/MDIX
• IEEE1901 and HomePlug AV compliant

Transmission Speed
• 500Mbps max.

Modulation
• Supports OFDM
- 4096/1024/256/64/16/8 QAM, QPSK, BPSK and ROBO

Frequency Range
• 2MHz ~ 70MHz

Security
• 128-bit AES Link Encryption with key management for secure power line communications
• Encryption:
- NMK (Network Membership Key) used to authenticate/access
• Rotating NEK (Network Encryption Key)

Quality of Service Control
• Enhancements: contention-free access, four-level priority based contention access, and multi segment bursting
• ToS, CoS and IP Port Number Packet Classifiers
• Supports IGMP managed multicast sessions
• IGMP snooping with multicast to multiple unicast support in CSMA
• QoS classification for quasi-error-free delivery
- VLAN priority field, ToS Field
• Enhanced IPv4/IGMPv1-3 snooping support
• Supports IPv6 and MLDv1-2 snooping

Supported Operating Systems
• Windows 98 / 98SE / Me / 2000 / XP / Vista / 7
• Other 10/100/1000 Base-T Ethernet devices

Device Port
• Ethernet RJ-45

Power Supply Specifications
• Input: 100~240V AC, 50~60Hz
• Protection: OCP, OVP, SCP

Power Saving (* depends on input power voltage)
• Up to 86% power reduction in standby mode
• Power consumption < 1W in standby mode

Hardware Specifications
Physical Interface
• AC power plug
• RJ-45 Giga Ethernet
• Sync button
• Reset button
• LED display:
- POWER
- PLC
- ETH
Physical Specifications
• Dimensions (W, D, H): 3.63” x 2.41” x 1.73” (93mm x 62mm x 44mm)

Operating Environment
• Operating temperature: 0 ~ 40 °C
• Storage temperature: -20 ~ 70 °C
• Humidity: 20 ~ 95% non-condensing