Billion 4500NZ 4GEE Setup

Discussion for models not listed
Post Reply
AcelinH
Posts: 1
Joined: Thu Jul 30, 2020 6:14 pm

Billion 4500NZ 4GEE Setup

Post by AcelinH » Thu Jul 30, 2020 6:20 pm

Hi,

I have been trying to set up my Billion 4500NZ to then use a L2TP VPN so I can get a public IP Address instead of the shared one I get with my EE 4G Router. I put my EE 4G SIm Card in to the Router, go through the set up and enter the APN Details which are as follows:

Dial: *99~
APN: everywhere
User: eesecure
Pass: secure

And I just get an error once it has configured for 5 minutes saying "EZSO fail!! - The WAN Port was unsuccessful"

Any help to get the router working would be greatly appreciated!

billion_fan
Posts: 5208
Joined: Tue Jul 19, 2011 4:30 pm

Re: Billion 4500NZ 4GEE Setup

Post by billion_fan » Mon Aug 03, 2020 10:18 am

AcelinH wrote:
Thu Jul 30, 2020 6:20 pm
Hi,

I have been trying to set up my Billion 4500NZ to then use a L2TP VPN so I can get a public IP Address instead of the shared one I get with my EE 4G Router. I put my EE 4G SIm Card in to the Router, go through the set up and enter the APN Details which are as follows:

Dial: *99~
APN: everywhere
User: eesecure
Pass: secure

And I just get an error once it has configured for 5 minutes saying "EZSO fail!! - The WAN Port was unsuccessful"

Any help to get the router working would be greatly appreciated!
Try manually logging into the router on http://192.168.1.254, then click on 'Configuration >> Interface Setup >> Internet, make sure the APN is correctly entered there.

Also check 'Status >> 4G/LTE Status' to check the sim connectivity,

Post Reply