Billion7401VGPM- Broken Web Server

Discussion for models not listed
Post Reply
niciunum
Posts: 1
Joined: Sun May 25, 2014 4:09 am

Billion7401VGPM- Broken Web Server

Post by niciunum » Sun May 25, 2014 4:30 am

Hello everyone,

Updated to the latest firmware ,

FOR_PCRange_7401VGPM_5.74d.afw

But when a change to web server port made from web interface, web server never went back online to the new link:port shown while rebooting.
Firewall was off.
I tried with telnet, changed port back to 80, restarted the server , but no joy!
I checked error logs but no information shown.

Is there a way to recover it or reload the default settings or update/reload the firmware image?

thanks

billion_fan
Posts: 5211
Joined: Tue Jul 19, 2011 4:30 pm

Re: Billion7401VGPM- Broken Web Server

Post by billion_fan » Tue May 27, 2014 10:27 am

niciunum wrote:Hello everyone,

Updated to the latest firmware ,

FOR_PCRange_7401VGPM_5.74d.afw

But when a change to web server port made from web interface, web server never went back online to the new link:port shown while rebooting.
Firewall was off.
I tried with telnet, changed port back to 80, restarted the server , but no joy!
I checked error logs but no information shown.

Is there a way to recover it or reload the default settings or update/reload the firmware image?

thanks
Try resetting the device using the reset pin hole, you will need a paperclip/pin to do this, and hold the reset button in for 10 seconds while the unit is powered on, this should reset the unit back to factory default settings

Post Reply