BiPAC 2074 wont sync

Discussions for BiPAC Homplug products: P106N, P106R2, 2073N, 2074..etc
Post Reply
amarjitr
Posts: 1
Joined: Mon Aug 19, 2013 3:29 pm

BiPAC 2074 wont sync

Post by amarjitr » Mon Aug 19, 2013 3:39 pm

Hi There,

I've had 3 BiPACs 2074s working well for a couple of years now.

I had a problem with a router and whilst diagnosing I reset my BiPAC and now I can't get any of them to sync with each other.

I've tried resetting them and nothing seems to work.

Whilst trying to do a sync reset (10secs) the PLC light seems to come on and then after 10 seconds is goes off.
One thing I have noticed is that according to the manual if you press Sync for 1-3 seconds the Power LED should flash - this does not happen on any of them.

I've also upgraded the firmware (v4.0.4.0-11-00) on all 3 of them and but still nothing works.

Once thing I have noticed is the DET 1.0 light flashes on one of the BiPACs but I have no other devices.
All 3 are plugged into wall sockets (2 downstairs and 1 upstairs).

Can anyone help?

Post Reply