Huawei 5776 or 5377 as primary WAN

Discussions about BiPAC 3G products: 7800GZ, 7300GX ...etc
Post Reply
NotEnoughOfAGeek
Posts: 1
Joined: Fri Jan 29, 2016 7:00 pm

Huawei 5776 or 5377 as primary WAN

Post by NotEnoughOfAGeek » Fri Jan 29, 2016 7:10 pm

Struggling to get a Huawei 5776 (on the compatibility list) and 5377 (newer version, not on the list) without success connected to a 7800DXL without success.

Have raised a ticket, but as phone line is down at the moment (physically) I'm in a bit of a hurry and was wondering if anyone can help.

I've set 3G/LTE as primary WAN. Set the APN etc. plugged the dongle into a PC to check it connects to web via the USB link - no issues.

The 7800DXL web pages reports "3G/LTE not ready. Please check...[etc.]" and never progresses past there.

Checked the system log and it appears to mount the USB as (paraphrasing a little, had to disconnect to get on here and didn't write it down) a Storage type Device choice #1 of 1.

Thanks in advance

Aremana
Posts: 2
Joined: Thu Dec 20, 2018 8:08 am

Re: Huawei 5776 or 5377 as primary WAN

Post by Aremana » Thu Dec 20, 2018 8:10 am

I have tried this method to use it and feel very good.

Post Reply