Bipac 7800N 1.06g Firmware

This area contains firmware that are currently under testings.
teaser
Posts: 23
Joined: Thu May 03, 2012 1:07 pm

Re: Bipac 7800N 1.06g Firmware

Post by teaser » Thu May 03, 2012 7:11 pm

Seems to be working fine for me!

Seems to have sorted out an issue with my GF's laptop's wifi connection taking forever to connect, but that could also just be the freshly applied settings I suppose...

morh*!^
Posts: 1
Joined: Thu Jan 26, 2012 6:45 pm

Re: Bipac 7800N 1.06g Firmware

Post by morh*!^ » Thu May 10, 2012 8:09 am

Hi all,

Can you please confirm if this version supports the sky mer authentication.

Thanks

billion_fan
Posts: 5205
Joined: Tue Jul 19, 2011 4:30 pm

Re: Bipac 7800N 1.06g Firmware

Post by billion_fan » Thu May 10, 2012 1:07 pm

Hi

Yes firmware 1.06g supports SKY MER for ADSL.

aanubis2003
Posts: 7
Joined: Fri May 11, 2012 9:19 pm

Re: Bipac 7800N 1.06g Firmware

Post by aanubis2003 » Fri May 11, 2012 10:17 pm

Works a treat !!! Over the moon with the Billion 7800N, Proper peice of kit!! Work well with my WHS 2011 also. Best buy in a long time made my day!!

bojanglez
Posts: 3
Joined: Sat May 12, 2012 9:26 am

Re: Bipac 7800N 1.06g Firmware

Post by bojanglez » Sat May 12, 2012 1:23 pm

I am having trouble connecting to Sky using MER, seems to hang on DHCP CLIENT IN PROGRESS. I had the same issue on 1.06f too, my sky router says uses MER when I try that so it's not as if my exchange doesn't it, any ideas from people who have it working?

AndyCap
Posts: 18
Joined: Fri Aug 05, 2011 10:00 am

Re: Bipac 7800N 1.06g Firmware

Post by AndyCap » Sat May 12, 2012 3:32 pm

I have tested this with Sky PPPoA and MER and everything seems fine so far but only just spent this morning playing around with it.

I do have a question, I set up two profiles MER and PPoA and both seemed to make a connection together/at same time with different IP's so they were both working.

But what I want to know is can you turn one or the other off so that you can switch between PPoA and MER?

I also set it up with MAC spoofing on the MER settings and again worked fine although it did take about 15 minuted to renew and connect.

What I have also done is save configs for the various setting I tried, so I can switch from only PPoA to only MER or both.

bojanglez
Posts: 3
Joined: Sat May 12, 2012 9:26 am

Re: Bipac 7800N 1.06g Firmware

Post by bojanglez » Sat May 12, 2012 5:52 pm

I tried with and without Mac spoofing, maybe I just didn't give it long enough. I will have another look tomorrow when I am home. I have left it trying so it might have connected when I get back :?

bojanglez
Posts: 3
Joined: Sat May 12, 2012 9:26 am

Re: Bipac 7800N 1.06g Firmware

Post by bojanglez » Sat May 12, 2012 5:55 pm

Do I have to set my IP and network mask, or should I leave it to try and obtain the info itself? Maybe someone who has out working could post their settings to help me?

AndyCap
Posts: 18
Joined: Fri Aug 05, 2011 10:00 am

Re: Bipac 7800N 1.06g Firmware

Post by AndyCap » Sat May 12, 2012 7:55 pm

These are what I did:

Upgrade to 1.06g Firmware and factory default settings.
Enter in all new settings (DO NOT IMPORT FROM OLDER SETTINGS)

RED = MER Settings

Image
Here are the steps:


1) Login to 7800N via Http.

2) Upgrade the beta firmware

3) Restart to the Factory Default Settings

4) Please choose the protocol as MPoA (RFC1483/RFC2684, Multiprotocol Encapsulation over AAL5)

5) Please enter VCI / VPI as 0/40

5) Please input the client ID as username and password separate with "|" e.g. username|password


Regards,

Admin

Tomken
Posts: 467
Joined: Tue Jul 26, 2011 10:31 am
Location: Co Durham

Re: Bipac 7800N 1.06g Firmware

Post by Tomken » Sun May 13, 2012 2:59 pm

Need the 1.06fdc back.

Just upgraded to 1.06g and my latency has increased by 11ms.

I'm always dubious about betas and looks like I was right about this one but because of the favourable reviews, succumbed against my better judgement.

Is there a link on the forum for the predcessor to this one ?

Post Reply