7800N 1.06e Release Candidate 3 Firmware

This area contains firmware that are currently under testings.
Post Reply
andyjrobinson
Posts: 11
Joined: Wed Jul 20, 2011 7:55 am
Location: Gateshead, United Kindgom
Contact:

7800N 1.06e Release Candidate 3 Firmware

Post by andyjrobinson » Tue Oct 11, 2011 8:27 am

Hi,

I found this firmware update over the past couple of days whilst the Billion site was down.

I am not sure of the release notes or changes in this version of the firmware, however it does seem to allow my 7800N to obtain higher sync speeds to TalkTalk.

Download here.

If any Billion staff can obtain the changes, this would be much appreciated.

Note: You may need to rename the file extension to .afw to flash the device, this is what I did.
Best Regards,
Andrew Robinson.

Tomken
Posts: 467
Joined: Tue Jul 26, 2011 10:31 am
Location: Co Durham

Re: 7800N 1.06e Release Candidate 3 Firmware

Post by Tomken » Sat Oct 22, 2011 3:22 pm

Thanks Andy - have upgraded with that although it hasn't improved my speeds with TT :D :(

Will have to see if it does anything for the FECs :)

andyjrobinson
Posts: 11
Joined: Wed Jul 20, 2011 7:55 am
Location: Gateshead, United Kindgom
Contact:

Re: 7800N 1.06e Release Candidate 3 Firmware

Post by andyjrobinson » Wed Oct 26, 2011 9:45 am

Hi,

Been doing some more hunting, and think the following is a small list of the changes in this version update:

New Features:
  • IPv6 support for url filter and remote access.
  • IPv6 ND Proxy when WAN protocol is MPoA.
  • Add encryption field with WLAN WDS feature, WDS encryption can now be different to the AP.
  • Add more syslog information for IPv6.
  • Enhance EWAN IPTV application for Internode.
Improvements:

N/A

Bug Fixes:
  • IPv6 dynamic prefix should only be padded on the internal address.
  • Fix issue whereby pptp can't work if DMZ is enabled.
  • Fix One to One NAT issues with failover.
  • Fix IPv6 failover issues.
  • Fix issue whereby unicast packets will only be forwarded to first PVC.
  • Allow '.' and '@' in PPTP user field.
  • Fix IPsec issue with multiple 0.0.0.0.
Known Issues

N/A
Best Regards,
Andrew Robinson.

Post Reply