8900AX-2400

Discussions for BiPAC 8900 series: 8900AX-1600, 8900AX-2400, 8900X
Post Reply
stevebez
Posts: 36
Joined: Thu Jun 07, 2012 10:02 am

8900AX-2400

Post by stevebez » Wed Feb 12, 2020 8:50 pm

Suddenly have severe interference on 2.4 ghz (all channels).

This is a new issue - the one aerial did break recently but the unit worked fine but now the 2.4 channel is unusable.

Any ideas? I have tried all sorts of reset / settings etc etc and no difference.

Thanks

billion_fan
Posts: 5202
Joined: Tue Jul 19, 2011 4:30 pm

Re: 8900AX-2400

Post by billion_fan » Thu Feb 13, 2020 9:17 am

stevebez wrote:
Wed Feb 12, 2020 8:50 pm
Suddenly have severe interference on 2.4 ghz (all channels).

This is a new issue - the one aerial did break recently but the unit worked fine but now the 2.4 channel is unusable.

Any ideas? I have tried all sorts of reset / settings etc etc and no difference.

Thanks
Not seen this before (I have seen interference 'Severe' before but still usable), be must some kind of interference within your environment . (I don' t think the antenna would cause this, as this would of shown up when the antenna first broke)

Also have you set the bandwidth to 20mhz.

What firmware version are you running??

Also is there any other device near the 8900AX-2400 that is outputting a wireless signal eg extender etc

Post Reply