TalkTalk Fibre

[Limpingadam]

Hello,

I've got through many of the posts on here regarding the router including the one on the billion website found here.

I have set the 'setting' to automatic, but it keeps trying to connect and failing not getting any up or down, but it goes to a 'green tick' on the status page.

I have also upgraded the firmware to 1.06a.

Any ideas why my billion will not connect, got a 7800n been using that along with the open reach router nah problems, that is the ECI version.

Confused as to why it's not just got on with things. Reason I've changed over is to see if I can get an all in one sorted fed up more wires then a rats nest, and the fact that you can't set anything on the modem, especially DNS, as Talk Talk DNS is constantly having issues.

Any ideas welcome.

[billion_fan]

Hello,

I've got through many of the posts on here regarding the router including the one on the billion website found here.

I have set the 'setting' to automatic, but it keeps trying to connect and failing not getting any up or down, but it goes to a 'green tick' on the status page.

I have also upgraded the firmware to 1.06a.

Any ideas why my billion will not connect, got a 7800n been using that along with the open reach router nah problems, that is the ECI version.

Confused as to why it's not just got on with things. Reason I've changed over is to see if I can get an all in one sorted fed up more wires then a rats nest, and the fact that you can't set anything on the modem, especially DNS, as Talk Talk DNS is constantly having issues.

Any ideas welcome.

Did you setup the VLAN??

[Limpingadam]

Set it to 101 and Wan Tag.

There's doesn't seem to be any login details for talk talk but yet it feels like the router needs there to be.

[billion_fan]

Set it to 101 and Wan Tag.

There's doesn't seem to be any login details for talk talk but yet it feels like the router needs there to be.

On your 7800N (when connected to your open reach modem) are using PPPOE or Obtain a IP address automatically?? (EWAN settings)

[Limpingadam]

EWAN obtaining automatically.

I have set the 8200N to do the same currently, as VDSL just won't have it on automatic.

[billion_fan]

EWAN obtaining automatically.

I have set the 8200N to do the same currently, as VDSL just won't have it on automatic.

What's listed within the system log?

[Limpingadam]

When it fails?

All I can see it there on a fresh reboot with automatic VDSL settings and 101 put in the VLAN on the correct settings.

[Jan 1 00:00:18 dnsmasq[330]: using nameserver 8.8.4.4#53
Jan 1 00:00:18 dnsmasq[330]: using nameserver 8.8.8.8#53
Jan 1 00:00:18 UPNPD[348]: HTTP listening on port 2800
Jan 1 00:00:18 UPNPD[348]: uuidvalue=uuid:28802880-2880-1880-a880-0004edd87db0
Jan 1 00:00:21 syslog: webs: admin (192.168.1.100) login... *]

I must add I changed to this firmware sometime last night [1.06a.dd2.dt1]

[billion_fan]

When it fails?

All I can see it there on a fresh reboot with automatic VDSL settings and 101 put in the VLAN on the correct settings.

[Jan 1 00:00:18 dnsmasq[330]: using nameserver 8.8.4.4#53
Jan 1 00:00:18 dnsmasq[330]: using nameserver 8.8.8.8#53
Jan 1 00:00:18 UPNPD[348]: HTTP listening on port 2800
Jan 1 00:00:18 UPNPD[348]: uuidvalue=uuid:28802880-2880-1880-a880-0004edd87db0
Jan 1 00:00:21 syslog: webs: admin (192.168.1.100) login... *]

I must add I changed to this firmware sometime last night [1.06a.dd2.dt1]

Is the DSL light on solid on the front of the router?

[Limpingadam]

Pretty sure it flashes and the internet one is orange.

[billion_fan]

Pretty sure it flashes and the internet one is orange.

If it flashes this means it is unable to sync, normally the DSL light should be on solid, on the status page of the router under 'Port Status' does the 'VDSL' section have a green tick next to it??