8800NL Setup parameters for Plusnet UK

[goldbug101]

Hi Folks.

Trying to replace the Plusnet-supplied OR modem and SagemCom router with the 8800NL but although ADSL light is on, cannot get internet light to come on.

From factory default what parameters do I need to change to get the 8800 to talk happily to Plusnet on FTTC / VDSL?

Thanks in advance for your help.

G.

[Kamiry]

We can communicate without the need to see each other, which is something incredible.

[billion_fan]

Hi Folks.

Trying to replace the Plusnet-supplied OR modem and SagemCom router with the 8800NL but although ADSL light is on, cannot get internet light to come on.

From factory default what parameters do I need to change to get the 8800 to talk happily to Plusnet on FTTC / VDSL?

Thanks in advance for your help.

G.

1. Reset the unit back to factory default settings
2. Login to the router on http://192.168.1.254
3. Click on 'Configuration >> WAN >> WAN Service'
4. Click on 'Edit' button for the PPPOE interface (PTM)
5. Enter your username and password in the section provided
6. Ensure the '802.1P Priority' is set to 0 and the ' 802.1Q VLAN ID' is set to 101
7. Click on 'Apply'
8. Click on 'Status >> WAN'
9. Check to see if your PPPOE connection has a 'IPv4 Address' shown, if you still don't have a green internet light on the front of the router double check your 'Advanced Setup >> Routing >> Default Gateway' to ensure your PPPOE connection is listed under 'Selected Default Gateway Interfaces'

[goldbug101]

Brilliant.

Thanks very much.

Now up and running on Billion and apparently getting nearly 26mbps.

Cheers

[dparr59]

Make sure you type User name & password in DO NOT COPY AND PASTE IT