When is 2.32e going to full release?

[ricke17]

Very weird.

[billion_fan]

Very weird.

Yep very weird, we had 2.32e up and running for a week on 8800NL before release and we didn't experience any reboots,

1. Try a reset back to factory defaults and manually reconfigure
2. Try older firmware
3. If the problem persists we might need to RMA your unit

[killsta]

Very weird.

Yep very weird, we had 2.32e up and running for a week on 8800NL before release and we didn't experience any reboots,

1. Try a reset back to factory defaults and manually reconfigure
2. Try older firmware
3. If the problem persists we might need to RMA your unit

Thanks - I'm going to monitor it tonight and if it does do it again I'll try a factory reset.

[ricke17]

Fingers crossed it is ok.

[Jaggies]

I've had 2.32e installed for a few weeks on my 8800AXL, but my synch rates have dropped from:

Upstream rate = 16429 Kbps, Downstream rate = 55695 Kbps

to:

Upstream rate = 12202 Kbps, Downstream rate = 52811 Kbps

Not all at once - I had a couple of overnight resynchs, but the connection is generally stable, so I've physically reset my connection a couple of times to see if it would improve, but each time I try it, down it goes...

I think a downgrade to previous firmware is called for - can someone please point me at a link?

[ricke17]

If you et a link to the previous firmware I'd like it too as is not as stable as the original firmware.

[underzone]

If you et a link to the previous firmware I'd like it too as is not as stable as the original firmware.

Here:

download/file.php?id=701

[ricke17]

If you et a link to the previous firmware I'd like it too as is not as stable as the original firmware.

Here:

download/file.php?id=701

Thanks for that - that seems to be the 8800NL version - do you have the 8800AXL version?

[underzone]

Both are here:

viewtopic.php?f=19&t=3522&hilit=dh65&start=60#p11264

[billion_fan]

The line could be put into DLM if you keep disconnecting the line or turning off the router, so try to minimize that