When is 2.32e going to full release?

[underzone]

Billion need the fix the QOS upstream bug in 2.32e. I applied and then removed QOS settings (set QOS to 20000/80000, click apply, then set to 0/0 and click apply again) as per: http://forum.kitz.co.uk/index.php/topic ... cseen.html
I too gained an extra 1MB throughput upstream.

[billion_fan]

Billion need the fix the QOS upstream bug in 2.32e. I applied and then removed QOS settings (set QOS to 20000/80000, click apply, then set to 0/0 and click apply again) as per: http://forum.kitz.co.uk/index.php/topic ... cseen.html
I too gained an extra 1MB throughput upstream.

Reported to our engineers

[Eddman]

do you have some where I could send the stats as I have 4 weeks of dslstats showing the different firmwares then the last slow "e" version.
BT Home hub 5 still 3 mb higher than Billion

Phillip

[joe2419]

Hi when is this going to be released as full f/ware t.i.a

[billion_fan]

do you have some where I could send the stats as I have 4 weeks of dslstats showing the different firmwares then the last slow "e" version.
BT Home hub 5 still 3 mb higher than Billion

Phillip

Not sure if the stats will help as there are many factors that could effect the line speeds eg environment/line, how the router adjusts to the local exchange, chipset/exchange compatibility etc

Lets wait and see what Broadcom reply about the incorrect attainable rate and take it from there.

[billion_fan]

Hi when is this going to be released as full f/ware t.i.a

Firmware can be found here on our official UK support site
http://www.billion.uk.com/esupport/inde ... -available

[joe2419]

Thanks for this billion.

[Eddman]

do you have some where I could send the stats as I have 4 weeks of dslstats showing the different firmwares then the last slow "e" version.
BT Home hub 5 still 3 mb higher than Billion

Phillip

Not sure if the stats will help as there are many factors that could effect the line speeds eg environment/line, how the router adjusts to the local exchange, chipset/exchange compatibility etc

Lets wait and see what Broadcom reply about the incorrect attainable rate and take it from there.

Hi

I have had the HH5 B with broadcom chip-set on for over 2 weeks now and the dlm has kicked my speed back to 76mb best it could with with 8800 and last firmware 2.32e was 60mb
So something not right, as both routers using Broadcom Chips Pity as I would have thought Billon better than cheap BT HH 5
This is the speed test :-

http://www.thinkbroadband.com/speedtest ... 3855792945

This is the stats from the HH5

Firmware version: v0.07.03.0814-BT (Type B) Last updated [Unknown]
Board version: 01
VDSL uptime: 1 days, 22:43:26
Data Rate: 17940 / 75318
Maximum Data Rate: 18160 / 76141
Noise Margin: 6.3 / 6.3
Line Attenuation: 0.0 / 20.6
Signal Attenuation: 0.0 / 0.0

maybe in a couple of weeks I might try the 8800 again. but do not want to drop 10mb trying, so will leave well alone,
Until you find out the issue.

Just a foot note G.IMP is not either billion or HH5

P

[7800nUser]

Could you have an iffy 8800?, as my 8800axl is fine with the 2.32d.dh65 firmware. Here are my stats:-

Code: Select all

Stats recorded 16 Jul 2015 14:22:43

DSLAM/MSAN type:        	BDCM:0xa485 / v0xa485
Modem/router firmware:  	AnnexA version - A2pv6F039g1.d24m
DSL mode:               	VDSL2 Profile 17a
Status:                 	Showtime
Uptime:                 	1 day 23 hours 18 min 45 sec
Resyncs:                	0 (since 16 Jul 2015 14:22:38)
			
				Downstream	Upstream
Line attenuation (dB):  	15.6		0.0
Signal attenuation (dB):	Not monitored		
Connection speed (kbps):	79999		19999
SNR margin (dB):        	7.3		16.9
Power (dBm):            	13.0		6.9
Interleave depth:       	16		1
INP:                    	48.00		0
G.INP:                  	Enabled		

RSCorr/RS (%):          	0.0196		0.9173
RSUnCorr/RS (%):        	0.0000		0.0000
ES/hour:                	0		7.76

http://www.thinkbroadband.com/speedtest ... 2374615355