DHCP Lease Time on 8800NL

[Oldjim]

I can't explain what is happening as the spurious lease time seems to only apply when connecting by wireless and mostly on the guest network when the security password isn't correct
In both the default and the guest network the maximum lease time is set to 24 hours
However I actually have two devices showing up with the same IP address on the default network although the Ubuntu one is no longer connected (it was connected wired I believe although it may have tried to connect wireless as well as it was a laptop I was fixing using a Ubuntu boot disk) and the other one would have failed validation as it doesn't have access to the default network

2015-09-27_175933.jpg

Note that devices shown leased to 1.103, 1.104, 1.105 were not allowed access as they don't have that password
So something is totally screwed but I have no idea what

[Oldjim]

It now gets even sillier
Screen print taken at 17.59

2015-09-27_175933.jpg

Screen print taken at 19.23

2015-09-27_192300.jpg

Note that the lease time of the lower one decrements correctly the other two don't change
Also the entry for 1.105 has vanished

[nanotm]

Have you tried a restart to see if that fixes it?

[Oldjim]

not yet I will wait to see if the Billion rep (if there is one) has any suggestions

[Oldjim]

It looks like I am not alone viewtopic.php?f=19&t=3600
So I would suggest leaving this topic until Billion come up with a fix

[billion_fan]

It looks like I am not alone viewtopic.php?f=19&t=3600
So I would suggest leaving this topic until Billion come up with a fix

Already reported waiting for a update from our engineers