be4con wrote:Ah, ok, I misunderstood, I thought I had to set the DMZ on the billion. OK, will I need to set the SR102 with a fixed IP too?
The SR102, should already have a fixed IP, so will the Billion Bipac 7800N, its the WAN IP that the billion is assigned from the SR102 that needs to be fixed. So that the WAN IP does not change and dmz rule will still be inplace.
I have another question which I hope you can help me with relating to port forwarding.
My existing network (and the billion) uses the following DNS protocol 192.168.11.xx, the sky hub is on 192.168.0.xxx
I assume that I have to forward ports through the hub as well as through the billion. So my question is this - do I forward ports on the hub to the address the router has been assigned - 192.168.0.7 and then forward through the billion as normal to my pc ip address or do I port forward on the sky hub direct to my pc?
be4con wrote:I have another question which I hope you can help me with relating to port forwarding.
My existing network (and the billion) uses the following DNS protocol 192.168.11.xx, the sky hub is on 192.168.0.xxx
I assume that I have to forward ports through the hub as well as through the billion. So my question is this - do I forward ports on the hub to the address the router has been assigned - 192.168.0.7 and then forward through the billion as normal to my pc ip address or do I port forward on the sky hub direct to my pc?
As the Billion is in DMZ already, all you should have to do is port forward on the Billion to your PC
