8800NL R2 firmware version 2.50a.d13
The wifi is doing some odd things...
Wireless devises connect to the router ok but for some reason various websites can't be reached and timeout like facebook or instagram for instance.
anything connected via cable works ok.
I set the log to debugging and rebooted the router - this is the system log
Code: Select all
Jan 1 00:00:14 kern warn kernel: bcmPktDmaBds_init: Broadcom Packet DMA BDs initialized
Jan 1 00:00:14 kern info kernel: GACT probability NOT on
Jan 1 00:00:14 kern info kernel: Mirror/redirect action on
Jan 1 00:00:14 kern info kernel: u32 classifier
Jan 1 00:00:14 kern info kernel: input device check on
Jan 1 00:00:14 kern info kernel: Actions configured
Jan 1 00:00:14 kern info kernel: TCP: cubic registered
Jan 1 00:00:14 kern info kernel: Initializing XFRM netlink socket
Jan 1 00:00:14 kern info kernel: NET: Registered protocol family 10
Jan 1 00:00:14 kern info kernel: IPv6 over IPv4 tunneling driver
Jan 1 00:00:14 kern info kernel: NET: Registered protocol family 17
Jan 1 00:00:14 kern info kernel: NET: Registered protocol family 15
Jan 1 00:00:14 kern info kernel: Initializing MCPD Module
Jan 1 00:00:14 kern info kernel: Ebtables v2.0 registered
Jan 1 00:00:14 kern info kernel: ebt_time registered
Jan 1 00:00:14 kern info kernel: ebt_ftos registered
Jan 1 00:00:14 kern info kernel: ebt_wmm_mark registered
Jan 1 00:00:14 kern info kernel: 8021q: 802.1Q VLAN Support v1.8
Jan 1 00:00:14 kern err kernel: SQUASHFS error: Xattrs in filesystem, these will be ignored
Jan 1 00:00:14 kern err kernel: SQUASHFS error: unable to read xattr id index table
Jan 1 00:00:14 kern info kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:0.
Jan 1 00:00:14 kern info kernel: Freeing unused kernel memory: 208k freed
Jan 1 00:00:14 kern warn kernel: usb r:0
Jan 1 00:00:14 kern warn kernel: chipinfo: module license 'proprietary' taints kernel.
Jan 1 00:00:14 kern warn kernel: Disabling lock debugging due to kernel taint
Jan 1 00:00:14 kern warn kernel: brcmchipinfo: brcm_chipinfo_init entry
Jan 1 00:00:14 kern warn kernel: bcmxtmrt: Broadcom BCM3381B0 ATM/PTM Network Device v0.6 Jul 19 2016 15:20:08
Jan 1 00:00:14 kern warn kernel: Broadcom Ingress QoS Module Char Driver v0.1 Jul 19 2016 15:19:44 Registered<243>^[[0m
Jan 1 00:00:14 kern warn kernel: Broadcom Ingress QoS ver 0.1 initialized
Jan 1 00:00:14 kern warn kernel: BPM: tot_mem_size=67108864B (64MB), buf_mem_size <15%> =10066320B (9MB), num of buffers=4993, buf size=2016
Jan 1 00:00:14 kern warn kernel: Broadcom BPM Module Char Driver v0.1 Jul 19 2016 15:19:43 Registered<244>^[[0m
Jan 1 00:00:14 kern warn kernel: NBUFF v1.0 Initialized
Jan 1 00:00:14 kern warn kernel: ^[[0;36;44mInitialized fcache state^[[0m
Jan 1 00:00:14 kern warn kernel: ^[[0;36;44mBroadcom Packet Flow Cache Char Driver v2.2 Jul 19 2016 15:19:44 Registered<242>^[[0m
Jan 1 00:00:14 kern warn kernel: Created Proc FS /procfs/fcache
Jan 1 00:00:14 kern warn kernel: ^[[0;36;44mConstructed Broadcom Packet Flow Cache v2.2 Jul 19 2016 15:19:44^[[0m
Jan 1 00:00:14 kern warn kernel: bcmxtmcfg: bcmxtmcfg_init entry
Jan 1 00:00:14 kern warn kernel: adsl: adsl_init entry
Jan 1 00:00:14 kern warn kernel: Broadcom BCM63381B0 Ethernet Network Device v0.1 Jul 19 2016 15:20:00
Jan 1 00:00:14 kern warn kernel: ETH Init: Ch:0 - 200 tx BDs at 0xa2a87000
Jan 1 00:00:14 kern warn kernel: ETH Init: Ch:0 - 1997 rx BDs at 0xa39f4000
Jan 1 00:00:14 kern warn kernel: dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
Jan 1 00:00:14 kern warn kernel: eth0: <Int sw port: 0> <Logical : 00> PHY_ID <0x00000001 : 0x01> MAC : 60:03:47:2E:E1:F1
Jan 1 00:00:14 kern warn kernel: eth1: <Int sw port: 1> <Logical : 01> PHY_ID <0x00000002 : 0x02> MAC : 60:03:47:2E:E1:F1
Jan 1 00:00:14 kern warn kernel: eth2: <Int sw port: 2> <Logical : 02> PHY_ID <0x00000003 : 0x03> MAC : 60:03:47:2E:E1:F1
Jan 1 00:00:14 kern warn kernel: eth3: <Int sw port: 3> <Logical : 03> PHY_ID <0x00000004 : 0x04> MAC : 60:03:47:2E:E1:F1
Jan 1 00:00:14 kern warn kernel: eth4: <Int sw port: 4> <Logical : 04> PHY_ID <0x05180018 : 0x18> MAC : 60:03:47:2E:E1:F1
Jan 1 00:00:14 kern warn kernel: Ethernet Auto Power Down and Sleep: Enabled
Jan 1 00:00:14 kern info kernel: NComm TMS V6.80 Kernel Module loaded.
Jan 1 00:00:14 kern info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 00:00:14 kern warn kernel: PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
Jan 1 00:00:14 kern debug kernel: ehci_hcd 0000:00:0a.0: setting latency timer to 64
Jan 1 00:00:14 kern info kernel: ehci_hcd 0000:00:0a.0: EHCI Host Controller
Jan 1 00:00:14 kern info kernel: ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
Jan 1 00:00:14 kern warn kernel: ehci_hcd 0000:00:0a.0: Enabling legacy PCI PM
Jan 1 00:00:14 kern info kernel: ehci_hcd 0000:00:0a.0: irq 113, io mem 0x1000c300
Jan 1 00:00:14 kern info kernel: ehci_hcd 0000:00:0a.0: USB f.f started, EHCI 1.00
Jan 1 00:00:14 kern info kernel: hub 1-0:1.0: USB hub found
Jan 1 00:00:14 kern info kernel: hub 1-0:1.0: 1 port detected
Jan 1 00:00:14 kern info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 1 00:00:14 kern warn kernel: PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
Jan 1 00:00:14 kern debug kernel: ohci_hcd 0000:00:09.0: setting latency timer to 64
Jan 1 00:00:14 kern info kernel: ohci_hcd 0000:00:09.0: OHCI Host Controller
Jan 1 00:00:14 kern info kernel: ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
Jan 1 00:00:14 kern info kernel: ohci_hcd 0000:00:09.0: irq 112, io mem 0x1000c400
Jan 1 00:00:14 kern info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:14 kern info kernel: hub 2-0:1.0: 1 port detected
Jan 1 00:00:14 kern info kernel: usbcore: registered new interface driver usblp
Jan 1 00:00:14 kern info kernel: Initializing WLCSM Module
Jan 1 00:00:14 kern info kernel: WLCSM Module loaded successfully
Jan 1 00:00:14 kern warn kernel: --SMP support
Jan 1 00:00:14 kern warn kernel: wl: dsl_tx_pkt_flush_len=338
Jan 1 00:00:14 kern warn kernel: wl: norm_wmark_tot=1417, pktc_wmark_tot=1417
Jan 1 00:00:14 kern warn kernel: PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
Jan 1 00:00:14 kern warn kernel: initvars_cis_pci: Not CIS format
Jan 1 00:00:14 kern warn kernel: wl:srom/otp not programmed, using main memory mapped srom info(wombo board)
Jan 1 00:00:14 kern warn kernel: wl: ID=pci/2/0/
Jan 1 00:00:14 kern warn kernel: wl: ID=pci/2/0/
Jan 1 00:00:14 kern warn kernel: wl: loading /etc/wlan/bcm43217_map.bin
Jan 1 00:00:14 kern warn kernel: srom rev:8
Jan 1 00:00:14 kern warn kernel: wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=32
Jan 1 00:00:14 kern warn kernel: wl0: allocskbmode=1 currallocskbsz=256
Jan 1 00:00:14 kern warn kernel: wl0: Broadcom BCM43227 802.11 Wireless Controller 7.14.43.21.cpe4.16L02A.0-kdb
Jan 1 00:00:14 kern warn kernel: dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
Jan 1 00:00:14 kern warn kernel: p8021ag: p8021ag_init entry
Jan 1 00:00:14 kern info kernel: Broadcom 802.1Q VLAN Interface, v0.1
Jan 1 00:00:14 kern warn kernel: Host MIPS Clock divider pwrsaving is enabled
Jan 1 00:00:15 kern info kernel: Netfilter messages via NETLINK v0.30.
Jan 1 00:00:16 kern warn kernel: br_netlink_mcpd.c: Setting registration type 0 pid to 484
Jan 1 00:00:16 kern info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:17 kern info kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:18 kern info kernel: device eth0 entered promiscuous mode
Jan 1 00:00:18 kern info kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 1 00:00:21 kern info kernel: device eth1 entered promiscuous mode
Jan 1 00:00:21 kern info kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready
Jan 1 00:00:24 kern info kernel: device eth2 entered promiscuous mode
Jan 1 00:00:24 kern info kernel: ADDRCONF(NETDEV_UP): eth2: link is not ready
Jan 1 00:00:27 kern info kernel: device eth3 entered promiscuous mode
Jan 1 00:00:27 kern info kernel: ADDRCONF(NETDEV_UP): eth3: link is not ready
Jan 1 00:00:30 kern info kernel: device eth4 entered promiscuous mode
Jan 1 00:00:30 kern info kernel: ADDRCONF(NETDEV_UP): eth4: link is not ready
Jan 1 00:00:33 kern warn kernel: *** dslThread dslPid=955
Jan 1 00:00:33 kern warn kernel: BcmAdsl_Initialize=0xC0137050, g_pFnNotifyCallback=0xC0170E90
Jan 1 00:00:33 kern warn kernel: pSdramPHY=0xA3FFFFF8, 0x1B5799 0xDEADBEEF
Jan 1 00:00:33 kern warn kernel: *** XfaceOffset: 0x4FF90 => 0x4FF90 ***
Jan 1 00:00:34 kern warn kernel: *** PhySdramSize got adjusted: 0xF50C4 => 0x122FF8 ***
Jan 1 00:00:34 kern warn kernel: AdslCoreSharedMemInit: shareMemSize=61408(61408)
Jan 1 00:00:34 kern warn kernel: AdslCoreHwReset: pLocSbSta=81538000 bkupThreshold=3072
Jan 1 00:00:34 kern warn kernel: AdslCoreHwReset: AdslOemDataAddr = 0xA3FB4AD4
Jan 1 00:00:34 kern warn kernel: VersionInfo: A2pvI042c.d26e
Jan 1 00:00:34 kern warn kernel: ***BcmDiagsMgrRegisterClient: 0 ***
Jan 1 00:00:34 kern warn kernel: dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
Jan 1 00:00:34 kern warn kernel: bcmxtmcfg: DS xDSL G.inp Mode = DISABLED
Jan 1 00:00:34 kern warn kernel: XTM Init: Ch:0 - 499 rx BDs at 0xa278e000
Jan 1 00:00:34 kern warn kernel: XTM Init: Ch:1 - 16 rx BDs at 0xa2a55b80
Jan 1 00:00:34 kern warn kernel: bcmxtmrt: PTM/ATM Non-Bonding Mode configured in system
Jan 1 00:00:34 kern warn kernel: bcmxtmcfg: Out of sequence call to XTM_ASM_HANDLER::Uninitialize(). Recovering.
Jan 1 00:00:34 kern warn kernel: bcmxtmcfg: ATM Bonding configured in system. Fallback mode = Enabled
Jan 1 00:00:34 kern warn kernel: bcmxtmcfg: Bonding State is DATA_IDLE
Jan 1 00:00:34 kern warn kernel: bcmxtmcfg: SID MODE SET to 12 BIT MODE
Jan 1 00:00:34 kern warn kernel: bcmxtmcfg: ATM Bonding Mgmt Log Area = 82616d04
Jan 1 00:00:34 kern info kernel: nf_conntrack version 0.5.0 (923 buckets, 3692 max)
Jan 1 00:00:35 kern info kernel: xt_time: kernel timezone is -0000
Jan 1 00:00:36 kern info kernel: message received before monitor task is initialized kerSysSendtoMonitorTask
Jan 1 00:00:36 kern info kernel: monitor task is initialized pid= 430
Jan 1 00:00:38 kern warn kernel: Energy Efficient Ethernet: Enabled
Jan 1 00:00:39 user info syslog: WLAN Schedule Control on wl0 exit
Jan 1 00:00:40 kern crit kernel: eth1 (Int switch port: 1) (Logical Port: 1) Link UP 100 mbps full duplex
Jan 1 00:00:40 kern info kernel: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Jan 1 00:00:40 kern info kernel: br0: port 2(eth1) entered forwarding state
Jan 1 00:00:40 kern info kernel: br0: port 2(eth1) entered forwarding state
Jan 1 00:00:41 kern crit kernel: eth2 (Int switch port: 2) (Logical Port: 2) Link UP 100 mbps full duplex
Jan 1 00:00:41 kern info kernel: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
Jan 1 00:00:41 kern info kernel: br0: port 3(eth2) entered forwarding state
Jan 1 00:00:41 kern info kernel: br0: port 3(eth2) entered forwarding state
Jan 1 00:00:41 kern crit kernel: eth3 (Int switch port: 3) (Logical Port: 3) Link UP 100 mbps full duplex
Jan 1 00:00:41 kern info kernel: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
Jan 1 00:00:41 kern info kernel: br0: port 4(eth3) entered forwarding state
Jan 1 00:00:41 kern info kernel: br0: port 4(eth3) entered forwarding state
Jan 1 00:00:45 kern info kernel: device wl0 entered promiscuous mode
Jan 1 00:00:45 kern info kernel: br0: port 6(wl0) entered forwarding state
Jan 1 00:00:45 kern info kernel: br0: port 6(wl0) entered forwarding state
Jan 1 00:00:46 daemon info WLAN Schedule: WLAN Schedule Control on wl0 start
Jan 1 00:00:52 kern crit kernel: Line 0: ADSL G.992 channel analysis
Jan 1 00:00:58 kern crit kernel: Line 0: ADSL G.992 message exchange
Jan 1 00:01:19 kern crit kernel: Line 0: ADSL G.992 channel analysis
Jan 1 00:01:25 kern crit kernel: Line 0: ADSL G.992 message exchange
Jan 1 00:01:25 kern crit kernel: Line 0: ADSL link up, Bearer 0, us=1020, ds=16278
Jan 1 00:01:25 kern warn kernel: bcmxtmcfg: DS xDSL G.inp Mode = DISABLED
Jan 1 00:01:25 kern warn kernel: bcmxtmcfg: AutoSenseATM is not enabled. Link Traffic type from PHY=1
Jan 1 00:01:25 kern warn kernel: bcmxtmcfg: XTM Link Information, port = 0, State = UP(1), Service Support = ATM(1)
Jan 1 00:01:25 kern warn kernel: bcmxtmcfg: ReconfigureSAR port 0 traffictype 1
Jan 1 00:01:25 kern warn kernel: bcmxtmcfg: Normal(XTM/PTM) Mode enabled
Jan 1 00:01:26 kern warn kernel: bcmxtmrt: TxPAF Status = Disabled
Jan 1 00:01:26 kern warn kernel: bcmxtmrt: MAC address: 60 03 47 2e e1 f3
Jan 1 00:01:26 kern warn kernel: [DoCreateDeviceReq.710]: register_netdev
Jan 1 00:01:26 kern warn kernel: [DoCreateDeviceReq.712]: register_netdev done
Jan 1 00:01:26 kern warn kernel: bcmxtmcfg: Reserve TxQueueIdx=0 for vcid 0
Jan 1 00:01:26 kern warn kernel: XTM Init: Ch:0 - 400 tx BDs at 0xa39f8000
Jan 1 00:01:26 kern warn kernel: bcmxtmcfg: Connection UP, LinkActiveStatus=0x1, US=1020000, DS=16278000
Jan 1 00:01:26 daemon notice syslog: pppd:cms logging initialized.
Jan 1 00:01:26 daemon notice syslog: pppd:PPPoATM setdevname_pppoatm
Jan 1 00:01:26 daemon notice syslog: pppd:PPPoATM setdevname_pppoatm - SUCCESS
Jan 1 00:01:26 daemon notice syslog: pppd 2.4.1 started by admin, uid 0
Jan 1 00:01:26 daemon notice syslog: PPP: Start to connect ...
Jan 1 00:01:26 kern warn kernel: netdev path :
Jan 1 00:01:26 kern info kernel: pppoa0
Jan 1 00:01:26 kern info kernel: -> atm0
Jan 1 00:01:26 daemon notice syslog: pppd:Using interface pppoa0
Jan 1 00:01:26 daemon notice syslog: pppd:Connect: pppoa0 <-->
Jan 1 00:01:35 daemon notice syslog: pppd:LCP: timeout sending Config-Requests
Jan 1 00:01:35 daemon notice syslog: pppd:Connection terminated.
Jan 1 00:01:38 daemon notice syslog: PPP: Start to connect ...
Jan 1 00:01:38 kern warn kernel: netdev path :
Jan 1 00:01:38 kern info kernel: pppoa0
Jan 1 00:01:38 kern info kernel: ->
Jan 1 00:01:38 kern info kernel: atm0
Jan 1 00:01:38 daemon notice syslog: pppd:Using interface pppoa0
Jan 1 00:01:38 daemon notice syslog: pppd:Connect: pppoa0 <-->
Jan 1 00:01:38 daemon crit syslog: PPP LCP UP.
Jan 1 00:01:39 daemon notice syslog: pppd:Remote message: CHAP authentication success, unit 5407
Jan 1 00:01:39 daemon notice syslog: pppd:local IP address 79.77.17.117
Jan 1 00:01:39 daemon notice syslog: pppd:remote IP address 62.24.254.201
Jan 1 00:01:39 daemon notice syslog: pppd:primary DNS address 62.24.134.1
Jan 1 00:01:39 daemon notice syslog: pppd:secondary DNS address 78.151.235.2
Jan 1 00:01:39 daemon crit syslog: Received valid IP address from server. Connection UP.
thanks
) with it...