DHCP oddity on Billion 8800nl r2

[telecomsconsortium]

hi Billion,

if you change the 880nl r2 default ip from 192.168.1.254 to 192.168.1.1 on the lan, the firmware changes the dhcp scope by default to 192.168.1.1 - 254?



Any chance this could be fixed so that the 8800nl r2 does not try to give out it's ip address to another device by dhcp?

[billion_fan]

hi Billion,

if you change the 880nl r2 default ip from 192.168.1.254 to 192.168.1.1 on the lan, the firmware changes the dhcp scope by default to 192.168.1.1 - 254?



Any chance this could be fixed so that the 8800nl r2 does not try to give out it's ip address to another device by dhcp?

What firmware version are you running??

[telecomsconsortium]

What firmware version are you running??

Zcomax8800NLR2_2.52.d12.afw which I think is the latest?

[billion_fan]

What firmware version are you running??

Zcomax8800NLR2_2.52.d12.afw which I think is the latest?

Let me check with our engineers and get to you.

[telecomsconsortium]

Let me check with our engineers and get to you.

Thank you

[billion_fan]

Let me check with our engineers and get to you.

Thank you

Got a reply from our engineers they stated its set by BCM design, and it hard to change/adjust, The default will always be xxx.xxx.xxx.1 ~ xxx.xxx.xxx.254

We recommend manually setting the DCHP range to leave out the LAN IP of the router when configuring the device