Bipac 8200AXL/8206AZ Firmware + Guides + Maunals

[billion_fan]

Bipac 8200AXL Firmware - https://support.billion.uk.com/index.ph ... ac-8200axl

Bipac 8206AZ Firmware - https://support.billion.uk.com/index.ph ... pac-8206az

Advanced Setup Guides - https://support.billion.uk.com/index.ph ... axl_8206az

Spec Sheet Bipac 8200AXL - https://support.billion.uk.com/index.ph ... spec-sheet

Full Manual Bipac 8200AXL - https://support.billion.uk.com/index.ph ... ull-manual

Full Manual Bipac 8206AZ - https://support.billion.uk.com/index.ph ... ll-manual-

[MCoetzee91]

When will there be firmware for Manual Band Selection.
We have a problematic band 41 which we need to disable. Then it should Aggregate with 3 or all of the following. B1, B3, B8, B20 and B38

Band 41 was a temporary band used by our countries ISP's during covid. The regulator already gave orders to shut down band 41 which will be replaced with band 20 and Band 38

We already have b1, b3 and b8 active on the one provider


On the other provider we have - B1, B3, B40 active. and soon to be active - B20

*Not including frequencies used for 5G

[billion_fan]

When will there be firmware for Manual Band Selection.
We have a problematic band 41 which we need to disable. Then it should Aggregate with 3 or all of the following. B1, B3, B8, B20 and B38

Band 41 was a temporary band used by our countries ISP's during covid. The regulator already gave orders to shut down band 41 which will be replaced with band 20 and Band 38

We already have b1, b3 and b8 active on the one provider


On the other provider we have - B1, B3, B40 active. and soon to be active - B20

*Not including frequencies used for 5G

Let me check with our engineers (for Bipac 8206AZ)

[Eagle2k]

Hi
Any update regarding this matter?

Also when trying to do Firmware upgrade on my router it states file format error. I tried using the .afw and also adding it to archive to .zip

Neither one works and just fails and reboots

referring to current .afw firmware available on site

[billion_fan]

Hi
Any update regarding this matter?

Also when trying to do Firmware upgrade on my router it states file format error. I tried using the .afw and also adding it to archive to .zip

Neither one works and just fails and reboots

referring to current .afw firmware available on site

Attached is the latest firmware with band selections, once you fix the mode to 'LTE Only' the band selection option will appear, attached is a screen shot example

If this firmware also fails (incorrect file error) make sure your model is the Bipac 8206AZ, if a ISP has provided you with the router, they might have locked the firmware, which you will then have to contact them for fw updates. (I had no issues upgrading to this firmware on a UK version of 8206AZ CAT 6)