8900AX-2400 How to Enable WPS

[RonnieMcAlpine]

Trying to install a printer which requires the 8900 WPS button to be pressed and working. Currently when I press the button on the back for less than 6sec no WPS light is activated on the front. Tried reading the manual to find out if I need to enable something in the system but could not find anything. Guidance would be appreciated.

[billion_fan]

Trying to install a printer which requires the 8900 WPS button to be pressed and working. Currently when I press the button on the back for less than 6sec no WPS light is activated on the front. Tried reading the manual to find out if I need to enable something in the system but could not find anything. Guidance would be appreciated.

1. Login to the router
2. Click on 'Configuration >> Wireless 2.4ghz >> Security
3. Set the 'WPS' option to 'Enable' and leave all other settings as default and click on 'Apply'
4. Press the WPS button on the router for around 2-3 seconds, the WPS light should start to flash, and you can then do the same on your printer

[RonnieMcAlpine]

Thank you Billion Fan, worked a treat.