BIPAC 7800n with Plusnet Fibre
-
Sandude
- Posts: 1
- Joined: Tue Jan 22, 2013 6:29 pm
BIPAC 7800n with Plusnet Fibre
Just Ordered PlusNet Fibre BB with and I believe I can use my 7800 instead of the supplied cheapo, is this correct please ? Dude
-
tinytim
- Posts: 218
- Joined: Sun Aug 14, 2011 4:53 pm
- Location: Benfleet, Essex
Re: BIPAC 7800n with Plusnet Fibre
No problem at all.
Works well with Infinity & PlusNet as well as Sky's Fibre.
Works well with Infinity & PlusNet as well as Sky's Fibre.
-
billion_fan
- Posts: 5398
- Joined: Tue Jul 19, 2011 4:30 pm
Re: BIPAC 7800n with Plusnet Fibre
We have a FTTC line here with Plusnet confirmed workingSandude wrote:Just Ordered PlusNet Fibre BB with and I believe I can use my 7800 instead of the supplied cheapo, is this correct please ? Dude
-
janimal
- Posts: 3
- Joined: Tue Feb 12, 2013 11:42 am
Re: BIPAC 7800n with Plusnet Fibre
I have been using a 7800n with plusnet fibre for a week now.
I thought everything was going well, however I wasn't very happy with my speeds. The dl speed was nowhere near the estimate for the line.
I was getting ~33mbps to ~37mpbs
Plusnet support just asked me to connect directly via the fibre modem over PPPoE and try some speed tests then. Now I am getting ~60-70mbps dl speed (but very variable ul speeds ~4mbps - 12mbps)
Connecting back through the 7800n resulted in the ~33mbps / ~15mbps again.
So it doesn't seem to be able to utilise the full bandwidth available. Has anyone else tried a speed comparison or have any idea why the speed should be so poor through the 7800n? I am using firmware 1.06g
[EDIT]
After a bit of searching I found this viewtopic.php?f=9&t=345
I can confirm any QoS rules defined will limit throughput to around 34mbps.
I thought everything was going well, however I wasn't very happy with my speeds. The dl speed was nowhere near the estimate for the line.
I was getting ~33mbps to ~37mpbs
Plusnet support just asked me to connect directly via the fibre modem over PPPoE and try some speed tests then. Now I am getting ~60-70mbps dl speed (but very variable ul speeds ~4mbps - 12mbps)
Connecting back through the 7800n resulted in the ~33mbps / ~15mbps again.
So it doesn't seem to be able to utilise the full bandwidth available. Has anyone else tried a speed comparison or have any idea why the speed should be so poor through the 7800n? I am using firmware 1.06g
[EDIT]
After a bit of searching I found this viewtopic.php?f=9&t=345
I can confirm any QoS rules defined will limit throughput to around 34mbps.