Billion UK Forum

Grimers wrote: ↑Fri Mar 23, 2018 10:17 am

evansnp wrote: ↑Thu Mar 22, 2018 5:03 pm Does this cause the PPP session to close, and recconect, as that's what's been happenning to me for the last few weeks?

Yes, this would cause the PPP session to close, but that issue could be caused by anything.

billion_fan wrote: ↑Fri Mar 23, 2018 9:22 am I'll get our engineers to check the bit swapping function (I'm not in all next week so will follow up once I return)

Yes, and the other issue which also affects the downstream as well!

Attached is a test firmware, let me know how you get on (it has a new DMT code)

THIS IS A TEST FIRMWARE NOT FOR GENERAL USE

Thanks, billion_fan! I've installed the firmware, and I'll let you know of the results.

Hmm, think it's still buggy...

adsl info --stats
adsl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 6563 Kbps, Downstream rate = 58053 Kbps
Bearer: 0, Upstream rate = 6563 Kbps, Downstream rate = 54997 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 4.5 6.5
Attn(dB): 26.9 0.0
Pwr(dBm): 11.9 3.1

VDSL2 framing
Bearer 0
MSGc: -6 26
B: 227 191
M: 1 1
T: 0 42
R: 10 12
S: 0.1319 0.9289
L: 14440 1757
D: 4 1
I: 238 102
N: 238 204
Q: 4 0
V: 0 0
RxQueue: 130 0
TxQueue: 26 0
G.INP Framing: 18 0
G.INP lookback: 26 0
RRC bits: 0 24
Bearer 1
MSGc: 122 -6
B: 0 0
M: 2 0
T: 2 0
R: 16 0
S: 8.0000 0.0000
L: 32 0
D: 1 0
I: 32 0
N: 32 0
Q: 0 0
V: 0 0
RxQueue: 0 0
TxQueue: 0 0
G.INP Framing: 0 0
G.INP lookback: 0 0
RRC bits: 0 0

Counters
Bearer 0
OHF: 0 1739815
OHFErr: 0 15
RS: 512498892 73043543
RSCorr: 2064238 11
RSUnCorr: 0 0
Bearer 1
OHF: 1055937 0
OHFErr: 0 0
RS: 8447003 0
RSCorr: 3800 0
RSUnCorr: 0 0

Retransmit Counters
rtx_tx: 94361 0
rtx_c: 93739 0
rtx_uc: 32660 0

G.INP Counters
LEFTRS: 5 0
minEFTR: 54967 0
errFreeBits: 14210787 0

Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 1792076045 0
Data Cells: 32183957 0
Drop Cells: 0
Bit Errors: 0 0

Bearer 1
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 0 0
Data Cells: 0 0
Drop Cells: 0
Bit Errors: 0 0

ES: 4 14
SES: 4 0
UAS: 122 122
AS: 16965

Bearer 0
INP: 54.00 0.00
INPRein: 1.00 0.00
delay: 0 0
PER: 0.00 9.79
OR: 0.01 26.14
AgR: 55117.80 6588.85

Bearer 1
INP: 2.00 0.00
INPRein: 2.00 0.00
delay: 0 0
PER: 16.06 0.01
OR: 63.75 0.01
AgR: 63.75 0.01

Bitswap: 3323/4071 8/8

Total time = 4 hours 44 min 47 sec
FEC: 2064238 11
CRC: 0 15
ES: 4 14
SES: 4 0
UAS: 122 122
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
FailedRetr: 0
FailedFastRetr: 0
Latest 15 minutes time = 14 min 47 sec
FEC: 98974 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
FailedRetr: 0
FailedFastRetr: 0
Previous 15 minutes time = 15 min 0 sec
FEC: 222012 0
CRC: 0 1
ES: 0 1
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: N/A
HostInitRetr: N/A
FailedRetr: N/A
Latest 1 day time = 4 hours 44 min 47 sec
FEC: 2064238 11
CRC: 0 15
ES: 4 14
SES: 4 0
UAS: 122 122
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
FailedRetr: 0
FailedFastRetr: 0
Previous 1 day time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
FailedRetr: 0
FailedFastRetr: 0
Since Link time = 4 hours 42 min 43 sec
FEC: 2064238 11
CRC: 0 15
ES: 4 14
SES: 4 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
FailedRetr: 0
FailedFastRetr: 0
NTR: mipsCntAtNtr=0 ncoCntAtNtr=0

Apparently, there's been 4 DS ES & SES, which I assume is from the 32660 DS rtx_uc but there's been 0 DS CRC, so I don't know how that's possible.

I've updated our engineers

Update! Seems to be working perfectly atm, after I restarted the router.

Grimers wrote: ↑Wed Apr 25, 2018 6:19 pm Update! Seems to be working perfectly atm, after I restarted the router.

That's great news, keep monitoring it and let me know how you get on

billion_fan wrote: ↑Tue Apr 03, 2018 11:57 am Snip...

Attached is a test firmware, let me know how you get on (it has a new DMT code)

THIS IS A TEST FIRMWARE NOT FOR GENERAL USE

Hi billion_fan

I've just bought an 8800AXL R2 and would like to install the latest FW on it. Can you please advise when the GA release of this test FW will be available?

Thanks in advance,

Paul

youngsyp wrote: ↑Tue May 01, 2018 9:53 pm

billion_fan wrote: ↑Tue Apr 03, 2018 11:57 am Snip...

Attached is a test firmware, let me know how you get on (it has a new DMT code)

THIS IS A TEST FIRMWARE NOT FOR GENERAL USE

Hi billion_fan

I've just bought an 8800AXL R2 and would like to install the latest FW on it. Can you please advise when the GA release of this test FW will be available?

Thanks in advance,

Paul

This firmware is a test firmware with a different DMT, we still waiting for further feedback/ internal discussions before we officially implement this firmware, as it stands 2.52.d10 is the latest release, which can be found on our support website.

Seems to be mostly stable, atm. Sometimes DS rtx_ucs occur with no DS CRCs, but I assume that can happen? Or, should there always be CRCs with rtx_ucs?

Current line stats:

adsl info --stats
adsl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 8558 Kbps, Downstream rate = 56105 Kbps
Bearer: 0, Upstream rate = 8558 Kbps, Downstream rate = 54906 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 3.4 5.9
Attn(dB): 26.8 0.0
Pwr(dBm): 12.0 6.1

VDSL2 framing
Bearer 0
MSGc: -6 -6
B: 227 227
M: 1 1
T: 0 0
R: 10 10
S: 0.1321 0.8474
L: 14416 2247
D: 4 4
I: 238 238
N: 238 238
Q: 4 4
V: 0 0
RxQueue: 130 15
TxQueue: 26 5
G.INP Framing: 18 18
G.INP lookback: 26 5
RRC bits: 24 24
Bearer 1
MSGc: 122 58
B: 0 0
M: 2 2
T: 2 2
R: 16 16
S: 8.0000 16.0000
L: 32 16
D: 1 1
I: 32 32
N: 32 32
Q: 0 0
V: 0 0
RxQueue: 0 0
TxQueue: 0 0
G.INP Framing: 0 0
G.INP lookback: 0 0
RRC bits: 0 0

Counters
Bearer 0
OHF: 0 0
OHFErr: 0 0
RS: 416286456 65141503
RSCorr: 2072122 39
RSUnCorr: 0 0
Bearer 1
OHF: 859143 862572
OHFErr: 0 0
RS: 6872653 3450291
RSCorr: 4745 2
RSUnCorr: 0 0

Retransmit Counters
rtx_tx: 133734 662
rtx_c: 133461 12
rtx_uc: 1 0

G.INP Counters
LEFTRS: 0 1
minEFTR: 54909 8560
errFreeBits: 11540074 1793740

Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 1455231998 0
Data Cells: 22240713 0
Drop Cells: 0
Bit Errors: 0 0

Bearer 1
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 0 0
Data Cells: 0 0
Drop Cells: 0
Bit Errors: 0 0

ES: 0 0
SES: 0 0
UAS: 122 122
AS: 13803

Bearer 0
INP: 54.00 47.00
INPRein: 1.00 0.00
delay: 0 0
PER: 0.00 0.00
OR: 0.01 0.01
AgR: 55026.19 8576.84

Bearer 1
INP: 2.00 4.00
INPRein: 2.00 4.00
delay: 0 0
PER: 16.06 16.06
OR: 63.75 31.87
AgR: 63.75 31.87

Bitswap: 2951/3272 18/18

Total time = 3 hours 52 min 5 sec
FEC: 2072122 39
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 122 122
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
FailedRetr: 0
FailedFastRetr: 0
Latest 15 minutes time = 7 min 5 sec
FEC: 100939 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
FailedRetr: 0
FailedFastRetr: 0
Previous 15 minutes time = 15 min 0 sec
FEC: 231817 13
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: N/A
HostInitRetr: N/A
FailedRetr: N/A
Latest 1 day time = 3 hours 52 min 5 sec
FEC: 2072122 39
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 122 122
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
FailedRetr: 0
FailedFastRetr: 0
Previous 1 day time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
FailedRetr: 0
FailedFastRetr: 0
Since Link time = 3 hours 50 min 1 sec
FEC: 2072122 39
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
FailedRetr: 0
FailedFastRetr: 0
NTR: mipsCntAtNtr=0 ncoCntAtNtr=0

billion_fan wrote: ↑Wed May 02, 2018 9:56 am This firmware is a test firmware with a different DMT, we still waiting for further feedback/ internal discussions before we officially implement this firmware, as it stands 2.52.d10 is the latest release, which can be found on our support website.

Thank you.

I've taken the (small) risk and am running my new 8800AXL R2 with the test firmware and thus far, it seems to be performing perfectly.

Paul